Rudder Port Bearings & Seals

IMPERIAL SIZE RUDDER PORT BEARING TYPE I

Click here to see detailed information about the product

Choose Size

RPB-I-5250

Manufacturer

Tides Marine

Product Code

RUDDER SEAL

Product Line

PORT

Price $1,967.70

Description

RPB-I-5250 – Tides Marine Rudder Port Seal Type I (aye) for a 5 1/4 inch rudder stock.

Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronze port bearings. Consisting of a one-piece UHMW plastic housing with nitrile lip seal, they were developed to replace the flax-packing and sealing nut assembly. They are connected to the bearing by a flexible hose which keeps the nitrile lip seal in alignment with the rudder stock.

The TYPE-I will minimally increase the overall height of the port assembly but is 100% watertight and maintenance free. Performance improvements include quieter, easier and smoother steering.

Included with each unit is a protective cone to prevent damage to the lip seal during installation. A pre-cut length of the soft wall hose (purchased separately) must be used with each TYPE-I Rudder Seal for warranty coverage to apply.

Note: This product is a seal only. It provides no bearing support for the rudder. It is generally more economical to eliminate the dual cost of a rudder port and this seal by using one of our other sealed bearing systems, such as a Type D, Type C or TS.

Note:
This product is seal only. It provides no bearing support for the rudder. It is generally more economical to eliminate the dual cost of a rudder port and this seal by using one of our other sealed bearing systems, such as a Type C, Type D or Tube System

Tides Marine Type I Rudder Seals are retrofit units which are designed to replace hose-mounted rudder stuffing boxes. They are connected to the existing bronze rudder port with a flexible hose which aligns the unit with the rudder stock.

The assembly consists of a one-piece UHMW housing and a nitrile lip seal. The Type I will slightly increase the overall height of the rudder port assembly.

These 100% watertight units provide quieter, smoother operation. A pre-cut length of soft-wall hose (purchased separately) must be used with each Type I Rudder Seal for warranty coverage to apply.


Rudder Port Bearings Type I may be ordered online.

To determine which part to order, measure the exact diameter of the rudder stock (.000″) and the O.D. of the bronze rudder port to which the unit will be connected. Note your combination of rudder stock diameter and rudder port O.D. in the table on the Imperial or Metric size page. Confirm that there is sufficient space to accommodate the flange height and the barrel height plus 1″ of space between the Type I unit and the rudder port. Finally, confirm that there is clearance for the O.D. of the Type I assembly.

RPB Type I Imperial Sizes

Specifications (dimensions in inches)

Select RPB Type I Imperial Sizes 

Rudder Stock OD Minimum Hose ID Flange Height Barrel Height Flange Diameter Retaining Ring Part Number Buy Online
A B C D E
1 2 1 1/2 1 1/2 2 1/2 185 RPB-I-1000-00 Buy Now
1 1 7/8 1 1/2 1 1/2 2 1/2 185 RPB-I-1000-01 Buy Now
1 2 1/8 1 1/2 1 1/2 2 1/2 185 RPB-I-1000-02 Buy Now
1 1 3/4 1 1/2 1 1/2 2 1/2 185 RPB-I-1000-03 Buy Now
Rudder Stock OD Minimum Hose ID Flange Height Barrel Height Flange Diameter Retaining Ring Part Number Buy Online
A B C D E
1 1/4 2 1/4 1 1/4 2 3 206 RPB-I-1250-00 Buy Now
1 1/4 2 1/2 1 1/4 2 3 206 RPB-I-1250-01 Buy Now
1 1/4 1 7/8 1 1/4 2 3 206 RPB-I-1250-02 Buy Now
1 1/4 2 3/8 1 1/4 2 3 206 RPB-I-1250-03 Buy Now
1 1/4 2 1/8 1 1/4 2 3 206 RPB-I-1250-04 Buy Now
1 1/4 2 1 1/4 2 3 206 RPB-I-1250-05 Buy Now
1 1/4 2 3/4 1 1/4 2 3 206 RPB-I-1250-06 Buy Now
Rudder Stock OD Minimum Hose ID Flange Height Barrel Height Flange Diameter Retaining Ring Part Number Buy Online
A B C D E
1 3/8 2 1/4 1 1/4 2 3 212 RPB-I-1375-00 Buy Now
1 3/8 2 1/2 1 1/4 2 3 212 RPB-I-1375-01 Buy Now
Rudder Stock OD Minimum Hose ID Flange Height Barrel Height Flange Diameter Retaining Ring Part Number Buy Online
A B C D E
1 1/2 3 1/2 1 3/4 1 3/4 4 250 RPB-I-1500-00 Buy Now
1 1/2 2 1/2 1 3/4 1 3/4 3 1/2 250 RPB-I-1500-01 Buy Now
1 1/2 2 1/4 1 3/4 1 3/4 3 1/2 250 RPB-I-1500-02 Buy Now
1 1/2 3 1 3/4 1 3/4 3 1/2 250 RPB-I-1500-03 Buy Now
1 1/2 3 1/4 1 3/4 1 3/4 3 1/2 250 RPB-I-1500-04 Buy Now
1 1/2 2 3/8 1 3/4 1 3/4 3 1/2 250 RPB-I-1500-05 Buy Now
1 1/2 2 3/4 1 3/4 1 3/4 3 1/2 250 RPB-I-1500-06 Buy Now
1 1/2 2 7/8 1 3/4 1 3/4 3 1/2 250 RPB-I-1500-07 Buy Now
1 1/2 2 1/8 1 3/4 1 3/4 3 1/2 250 RPB-I-1500-08 Buy Now
Rudder Stock OD Minimum Hose ID Flange Height Barrel Height Flange Diameter Retaining Ring Part Number Buy Online
A B C D E
1 3/4 3 2 2 4 250 RPB-I-1750-00 Buy Now
1 3/4 2 3/4 2 2 4 250 RPB-I-1750-01 Buy Now
1 3/4 2 7/8 2 2 4 250 RPB-I-1750-02 Buy Now
1 3/4 2 1/2 2 2 4 250 RPB-I-1750-03 Buy Now
1 3/4 2 5/8 2 2 4 250 RPB-I-1750-04 Buy Now
1 3/4 3 3/4 2 2 4 250 RPB-I-1750-05 Buy Now
1 3/4 3 1/2 2 2 4 250 RPB-I-1750-06 Buy Now
Rudder Stock OD Minimum Hose ID Flange Height Barrel Height Flange Diameter Retaining Ring Part Number Buy Online
A B C D E
2 2 3/4 2 2 4 300 RPB-I-2000-00 Buy Now
2 3 1/4 2 2 4 300 RPB-I-2000-01 Buy Now
2 3 1/2 2 2 4 300 RPB-I-2000-02 Buy Now
2 2 7/8 2 2 4 300 RPB-I-2000-04 Buy Now
2 3 3/4 2 2 4 300 RPB-I-2000-05 Buy Now
2 3 2 2 4 300 RPB-I-2000-06 Buy Now
2 4 1/2 2 2 5 300 RPB-I-2000-07 Buy Now
2 4 2 2 4 1/2 300 RPB-I-2000-08 Buy Now
2 3 3/8 2 2 4 300 RPB-I-2000-09 Buy Now
Rudder Stock OD Minimum Hose ID Flange Height Barrel Height Flange Diameter Retaining Ring Part Number Buy Online
A B C D E
2 1/4 3 1/2 2 2 4 1/2 325 RPB-I-2250-00 Buy Now
2 1/4 3 2 2 4 1/2 325 RPB-I-2250-01 Buy Now
2 1/4 3 3/4 2 2 4 1/2 325 RPB-I-2250-02 Buy Now
2 1/4 4 2 2 4 1/2 325 RPB-I-2250-03 Buy Now
2 1/4 3 1/4 2 2 4 1/2 325 RPB-I-2250-04 Buy Now
2 1/4 4 1/2 2 1/2 2 5 325 RPB-I-2250-05 Buy Now
Rudder Stock OD Minimum Hose ID Flange Height Barrel Height Flange Diameter Retaining Ring Part Number Buy Online
A B C D E
2 1/2 3 1/2 2 2 4 1/2 350 RPB-I-2500-00 Buy Now
2 1/2 4 1/4 2 2 4 1/2 350 RPB-I-2500-01 Buy Now
2 1/2 4 2 2 4 1/2 350 RPB-I-2500-02 Buy Now
2 1/2 6 3/4 2.259 5.380 350 RPB-I-2500-03 Buy Now
2 1/2 3 1/2 2 2 4 350 RPB-I-2500-04 Buy Now
2 1/2 3 3/4 2 2 4 1/2 350 RPB-I-2500-05 Buy Now
2 1/2 3 1/2 2 2 4 1/2 350 RPB-I-2500-06 Buy Now
2 1/2 4 1/2 2 2 5 350 RPB-I-2500-07 Buy Now
Rudder Stock OD Minimum Hose ID Flange Height Barrel Height Flange Diameter Retaining Ring Part Number Buy Online
A B C D E
2 3/4 3 1/2 2 1/2 2 5 375 RPB-I-2750-00 Buy Now
2 3/4 4 1/2 2 1/2 2 5 375 RPB-I-2750-01 Buy Now
2 3/4 4 2 1/2 2 5 375 RPB-I-2750-02 Buy Now
Rudder Stock OD Minimum Hose ID Flange Height Barrel Height Flange Diameter Retaining Ring Part Number Buy Online
A B C D E
3 4 2 2 1/2 5 400 RPB-I-3000-00 Buy Now
3 5 2 2 1/2 5 1/2 400 RPB-I-3000-01 Buy Now
3 4 1/2 2 2 1/2 5 400 RPB-I-3000-02 Buy Now
3 4 3/4 1 1/2 2 1/2 5 1/2 400 RPB-I-3000-03 Buy Now
3 5 1/2 2 1/2 2 1/2 6 400 RPB-I-3000-04 Buy Now
Rudder Stock OD Minimum Hose ID Flange Height Barrel Height Flange Diameter Retaining Ring Part Number Buy Online
A B C D E
3 1/4 3 3/4 2 1/2 2 1/2 5 425 RPB-I-3250-00 Buy Now
3 1/4 6 2 1/2 2 1/2 6 1/2 425 RPB-I-3250-01 Buy Now
3 1/4 4 1/4 2 1/2 2 1/2 5 425 RPB-I-3250-02 Buy Now
3 1/4 5 1/2 2 1/2 2 1/2 6 425 RPB-I-3250-04 Buy Now
3 1/4 5 2 1/2 2 1/2 5 1/2 425 RPB-I-3250-05 Buy Now
Rudder Stock OD Minimum Hose ID Flange Height Barrel Height Flange Diameter Retaining Ring Part Number Buy Online
A B C D E
3 1/2 4 1/2 2 1/2 2 5 1/2 450 RPB-I-3500-00 Buy Now
3 1/2 6 2 3 6 1/2 450 RPB-I-3500-01 Buy Now
3 1/2 5 2 1/2 2 5 1/2 450 RPB-I-3500-02 Buy Now
3 1/2 5 1/2 2 1/2 2 1/2 6 450 RPB-I-3500-03 Buy Now
3 1/2 4 1/4 2 1/2 2 5 1/2 450 RPB-I-3500-04 Buy Now
Rudder Stock OD Minimum Hose ID Flange Height Barrel Height Flange Diameter Retaining Ring Part Number Buy Online
A B C D E
3 3/4 5 2 1/2 2 1/2 5 1/2 475 RPB-I-3750-02 Buy Now
Rudder Stock OD Minimum Hose ID Flange Height Barrel Height Flange Diameter Retaining Ring Part Number Buy Online
A B C D E
4 5 1/2 2 3 6 500 RPB-I-4000-00 Buy Now
4 6 2 3 6 1/2 500 RPB-I-4000-01 Buy Now
4 7 2 3 8 500 RPB-I-4000-02 Buy Now
4 6 1/2 2 3 7 500 RPB-I-4000-03 Buy Now
Rudder Stock OD Minimum Hose ID Flange Height Barrel Height Flange Diameter Retaining Ring Part Number Buy Online
A B C D E
4 1/2 6 1/2 2 1/2 3 7 600 RPB-I-4500-00 Buy Now
4 1/2 6 2 1/2 3 7 600 RPB-I-4500-01 Buy Now
4 1/2 8 2 1/2 4 8 600 RPB-I-4500-02 Buy Now
Rudder Stock OD Minimum Hose ID Flange Height Barrel Height Flange Diameter Retaining Ring Part Number Buy Online
A B C D E
5 7 1/2 2 1/2 4 8 625 RPB-I-5000-01 Buy Now
5 6 1/2 2 1/2 3 1/2 8 625 RPB-I-5000-01 Buy Now
Rudder Stock OD Minimum Hose ID Flange Height Barrel Height Flange Diameter Retaining Ring Part Number Buy Online
A B C D E
5 1/4 8 2 1/2 4 8 1/2 625 RPB-I-5250-00 Buy Now
Rudder Stock OD Minimum Hose ID Flange Height Barrel Height Flange Diameter Retaining Ring Part Number Buy Online
A B C D E
5 1/2 6 1/2 2 1/2 3 1/2 8 650 RRPB-I-5500-00 Buy Now

Tides Marine offers many custom sizes and dimensions. Please call for any size or dimension you do not see here.

RPB Type I Metric Sizes
Specifications (dimensions in millimeters)

Rudder Stock OD Minimum Hose ID Flange Height Barrel Height Flange Diameter Retaining Ring Part Number Buy Online
A B C D E
25 38 38 38 64 150 RPB-I-25MM-00 Buy Now
30 57 44 51 76 225 RPB-I-30MM-00 Buy Now
40 60 38 44 89 250 RPB-I-40MM-00 Buy Now
70 114 64 51 127 375 RPB-I-70MM-00 Buy Now
70 89 64 51 127 375 RPB-I-70MM-01 Buy Now

Tides Marine offers many custom sizes and dimensions. Please call for any size or dimension you do not see here.

RPB-I Installation Guide

The following is a description of the installation procedures associated with the RPB Type-I rudder seal. Installation instructions are included with each unit and should be followed closely.

  1. Inspect that area of the rudder stock where the lip seal will rest and confirm that there is clean, smooth stock available to accept the lip seal.
  2. Block the rudder into position and disconnect the steering arm and rudder collar.
  3. Remove the blocking and carefully lower the rudder so that the rudder stock is beneath the upper rudder bearing. Confirm that there is sufficient clearance between the end of the stock and the underside of the shelf to add the Type-I assembly, the hose and hose clamps.
  4. Remove the old stuffing box, hose and clamps.
  5. Inspect the upper end of the rudder stock. Remove any burrs, nicks or sharp edges which might damage the lip seal during installation or operation.
  6. Insert the red installation hat all the way into the top of the Type-I to cover the thin sealing edge of the lip seal.
  7. Determine the length of hose needed to complete the installation and cut squarely to length. Note: There should be no less than 1″ of space between the bottom of the unit and the top of the existing rudder after the Type-I is installed.
  8. Connect the hose to the Type-I assembly and add two hose clamps.
  9. Slide the rudder stock up through the port. Place the remaining two hose clamps onto the barrel of the port.
  10. Slide the assembly down the stock and over the rudder port. Secure with hose clamps.
  11. Jack the rudder back into position (passing through the upper rudder bearing) and block in place.
  12. Reconnect the steering arm and rudder collar.

 

Note: Before installing the rudder, insert the red installation hat into the lip seal. When rudder is in place, remove, invert and replace it on top of the Type-I unit to keep debris off the lip seal during use.

 

Complete Type-I Installation Guide may be downloaded HERE

0
YOUR CART
  • No products in the cart.