- No products in the cart.
Click here to see detailed information about the product
RPB-E-4500-00 – The Tides Marine RPB Type E Rudder Port Bearing for 4 1/2 Inch Rudder Stock.
is designed to be installed in rudder tubes which have been laminated or welded into a vessel’s hull. The unit consists of a one-piece UHMW housing with a nitrile lip seal. It eliminates metal-to-metal contact and the associated problems of abrasion, electrolysis and corrosion.
It is 100% water tight and eliminates chatter and vibration, resulting in a quieter, smoother operation.
* PLEASE NOTE:
THE -00 MEANS IT IS OUR STANDARD MODEL. IF YOU ARE REPLACING AN EXISTING BEARING, PLEASE CHECK THE SERIAL NUMBER
TO SEE IF YOUR MODEL IS A -00 MODEL. IF IT IS NOT, PLEASE CALL TIDES MARINE AND ORDER THE CORRECT MODEL
|YOU CAN CHECK THE SERIAL NUMBER BY CLICKING ON THE SERIAL NUMBER LOOKUP LINK AT THE BOTTOM OF EVERY PAGE
ON THE WEB SITE.
The Tides Marine RPB Type E unit is designed to be installed in rudder tubes which have been laminated or welded into a vessel’s hull.
The unit consists of a one-piece UHMW housing with a nitrile lip seal. It eliminates metal-to-metal contact and the associated problems of abrasion and electrolytic corrosion. It is 100% watertight and eliminates chatter and vibration, resulting in a quieter, smoother operation.
Tides Marine makes Type E assemblies based upon a combination of rudder stock diameter (.000”) and the rudder tube I.D. When placing your order, please provide both of these dimensions.
|1 1/4||2 1/2||2 1/2||3||1 1/4||3 3/4||LIP SEAL 1250||206||RPB-E-1250-00||Buy Now|
|1 1/2||3||4||1 1/8||1 7/8||3||LIP SEAL 1500||250||RPB-E-1500-00||Buy Now|
|1 3/4||2 1/2||3 1/2||1 1/4||3||4 1/4||LIP SEAL 1750||250||RPB-E-1750-00||Buy Now|
|2||3||3 1/2||1 1/4||2 3/4||4||LIP SEAL R 2000||300||RPB-E-2000-00||Buy Now|
|2 1/4||3||5||1 1/4||3 1/2||4 3/4||LIP SEAL 2250||325||RPB-E-2250-00||Buy Now|
|2 3/8||4 1/2||5||1 1/4||3||4 1/2||LIP SEAL 60MM||350||RPB-E-2375-00||Buy Now|
|2 1/2||3.485||5||1 1/4||2 1/2||3 3/4||LIP SEAL R 2500||350||RPB-E-2500-00||Buy Now|
|2 3/4||4||5||1 1/4||4||5 1/4||LIP SEAL R 2750||375||RPB-E-2750-00||Buy Now|
|3||4||5||1 1/4||4||5 1/4||LIP SEAL R 3000||400||RPB-E-3000-00||Buy Now|
|3 1/2||4 1/2||5 1/2||1 1/2||6 1/2||8||LIP SEAL R 3500||450||RPB-E-3500-01||Buy Now|
|4||5 1/2||6||1 1/4||5 3/4||7||LIP SEAL R 4000||500||RPB-E-4000-00||Buy Now|
|4 1/4||5||6||1 1/4||3 3/4||5||LIP SEAL R 4250||525||RPB-E-4250-00||Buy Now|
|4 1/2||6 1/2||9||1 3/4||8||9 3/4||LIP SEAL R 4500||600||RPB-E-4500-00||Buy Now|
|5||6||8.1||1 3/4||5 1/4||7||LIP SEAL R 5000||625||RPB-E-5000-00||Buy Now|
|6||8||10.1||1 1/4||7 1/4||8 1/2||LIP SEAL R 6000||700||RPB-E-6000-00||Buy Now|
|6 1/2||9.120||10||2 1/2||3 1/5||6||LIP SEAL 6500||750||RPB-E-6500-00||Buy Now|
Tide Marine offers many custom sizes and dimensions. Please call for any size or dimension you do not see here.
The following is a description of the installation procedures associated with the RPB Type-E. Installation instructions are included with each unit and should be followed closely.
Note: Before installing the rudder, insert the red installation hat into the lip seal. When rudder is in place, remove, invert and replace it on top of the Type-E unit to keep debris off the lip seal during use.
Complete Type-E Installation Guide may be downloaded HERE
Please note that orders submitted over the weekend, through October 2nd, may experience a delay in processing, pushing shipment to October 3rd.
For emergency orders, please call 954-420-0949 opt. 1 to notify a member of the sales team.
Thank you for your understanding, we apologize for any inconvenience.