- No products in the cart.
Click here to see detailed information about the product
RPB-E-4000-00 – The Tides Marine RPB Type E Rudder Port Bearing for 4 Inch Rudder Stock.
is designed to be installed in rudder tubes which have been laminated or welded into a vessel’s hull. The unit consists of a one-piece UHMW housing with a nitrile lip seal. It eliminates metal-to-metal contact and the associated problems of abrasion, electrolysis and corrosion.
It is 100% water tight and eliminates chatter and vibration, resulting in a quieter, smoother operation.
* PLEASE NOTE:
THE -00 MEANS IT IS OUR STANDARD MODEL. IF YOU ARE REPLACING AN EXISTING BEARING, PLEASE CHECK THE SERIAL NUMBER
TO SEE IF YOUR MODEL IS A -00 MODEL. IF IT IS NOT, PLEASE CALL TIDES MARINE AND ORDER THE CORRECT MODEL
YOU CAN CHECK THE SERIAL NUMBER BY CLICKING ON THE SERIAL NUMBER LOOKUP LINK AT THE BOTTOM OF EVERY PAGE
ON THE WEB SITE.
The Tides Marine RPB Type E unit is designed to be installed in rudder tubes which have been laminated or welded into a vessel’s hull.
The unit consists of a one-piece UHMW housing with a nitrile lip seal. It eliminates metal-to-metal contact and the associated problems of abrasion and electrolytic corrosion. It is 100% watertight and eliminates chatter and vibration, resulting in a quieter, smoother operation.
Tides Marine makes Type E assemblies based upon a combination of rudder stock diameter (.000”) and the rudder tube I.D. When placing your order, please provide both of these dimensions.
|1 1/4||2 1/2||2 1/2||3||1 1/4||3 3/4||LIP SEAL 1250||206||RPB-E-1250-00||Buy Now|
|1 1/2||3||4||1 1/8||1 7/8||3||LIP SEAL 1500||250||RPB-E-1500-00||Buy Now|
|1 3/4||2 1/2||3 1/2||1 1/4||3||4 1/4||LIP SEAL 1750||250||RPB-E-1750-00||Buy Now|
|2||3||3 1/2||1 1/4||2 3/4||4||LIP SEAL R 2000||300||RPB-E-2000-00||Buy Now|
|2 1/4||3||5||1 1/4||3 1/2||4 3/4||LIP SEAL 2250||325||RPB-E-2250-00||Buy Now|
|2 3/8||4 1/2||5||1 1/4||3||4 1/2||LIP SEAL 60MM||350||RPB-E-2375-00||Buy Now|
|2 1/2||3.485||5||1 1/4||2 1/2||3 3/4||LIP SEAL R 2500||350||RPB-E-2500-00||Buy Now|
|2 3/4||4||5||1 1/4||4||5 1/4||LIP SEAL R 2750||375||RPB-E-2750-00||Buy Now|
|3||4||5||1 1/4||4||5 1/4||LIP SEAL R 3000||400||RPB-E-3000-00||Buy Now|
|3 1/2||4 1/2||5 1/2||1 1/2||6 1/2||8||LIP SEAL R 3500||450||RPB-E-3500-01||Buy Now|
|4||5 1/2||6||1 1/4||5 3/4||7||LIP SEAL R 4000||500||RPB-E-4000-00||Buy Now|
|4 1/4||5||6||1 1/4||3 3/4||5||LIP SEAL R 4250||525||RPB-E-4250-00||Buy Now|
|4 1/2||6 1/2||9||1 3/4||8||9 3/4||LIP SEAL R 4500||600||RPB-E-4500-00||Buy Now|
|5||6||8.1||1 3/4||5 1/4||7||LIP SEAL R 5000||625||RPB-E-5000-00||Buy Now|
|6||8||10.1||1 1/4||7 1/4||8 1/2||LIP SEAL R 6000||700||RPB-E-6000-00||Buy Now|
|6 1/2||9.120||10||2 1/2||3 1/5||6||LIP SEAL 6500||750||RPB-E-6500-00||Buy Now|
Tide Marine offers many custom sizes and dimensions. Please call for any size or dimension you do not see here.
The following is a description of the installation procedures associated with the RPB Type-E. Installation instructions are included with each unit and should be followed closely.
Note: Before installing the rudder, insert the red installation hat into the lip seal. When rudder is in place, remove, invert and replace it on top of the Type-E unit to keep debris off the lip seal during use.
Complete Type-E Installation Guide may be downloaded HERE
Please note that orders submitted over the weekend, through October 2nd, may experience a delay in processing, pushing shipment to October 3rd.
For emergency orders, please call 954-420-0949 opt. 1 to notify a member of the sales team.
Thank you for your understanding, we apologize for any inconvenience.