RPB-I-4500 - Tides Marine Rudder Port Seal Type I (aye) for a 4 1/2 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronze port bearings. Consisting of a one-piece UHMW plastic housing with nitrile lip seal, they were developed to replace the flax-packing and sealing nut assembly. They are connected to the bearing by a flexible hose which keeps the nitrile lip seal in alignment with the rudder stock.
The TYPE-I will minimally increase the overall height of the port assembly but is 100% watertight and maintenance free. Performance improvements include quieter, easier and smoother steering.
Included with each unit is a protective cone to prevent damage to the lip seal during installation. A pre-cut length of the soft wall hose (purchased separately) must be used with each TYPE-I Rudder Seal for warranty coverage to apply.Note: This product is a seal only. It provides no bearing support for the rudder. It is generally more economical to eliminate the dual cost of a rudder port and this seal by using one of our other sealed bearing systems, such as a Type D, Type C or TS.