Your shopping cart is empty!
URB-LP-40MM-00 - Upper Rudder Bearing Low Profile for a 40 Millimeter Rudder Stock.
The Tides Marine Upper Rudder Bearing-Low Profile (URB-LP) is designed to be installed on..
URB-LP-1750-00 - Upper Rudder Bearing Low Profile for a 1 3/4 Inch Rudder Stock.
The Tides Marine Upper Rudder Bearing-Low Profile (URB-LP) is designed to be installed on ve..
TS-30MM-1083 - Rudder Tube System for a 30 millimeter Rudder Stock.
Tube System Parts(1) FT-2500-1035 x 1(2) RPB-G-30MM-00 x 1(3) SB-UPBEAR-64 x 1(4) LIP SEAL 30MM x 2(5) WASHER 30MM x 1
..
FSKM-25M - SureSeal Drip Free Self Aligning Propeller Shaft Seal for a 25 Millimeter Propeller Shaft.Parts Included in this Kit:
FSA-25M-XXXX-X x 1
Articulated Hose x 1
Clamps x 4
HAT-MM25-02 ..
FSK-1000 - SureSeal Drip Free Self Aligning Propeller Shaft Seal for a 1 Inch Propeller Shaft.Parts Included in this Kit:
FSA-1000-XXXX-X x 1
Articulated Hose x 1
Clamps x 4
HAT-1000 x 1
The ..
RPB-E-1250-00 - The Tides Marine RPB Type E Rudder Port Bearing for 1 1/4 Inch Rudder Stock.
is designed to be installed in rudder tubes which have been laminated or welded into a vessel’s hull. Th..
RPB-I-40MM - Tides Marine Rudder Port Seal Type I (aye) for a 40 Millimeter rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing br..
RPB-I-1500 - Tides Marine Rudder Port Seal Type I (aye) for a 1 1/2 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 85 Millimeter Shaft.
This unit comes with one 85MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects i..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 3 1/4 Inch Shaft.
This unit comes with two 3 1/4" Lip Seals and 1 Protective Cover that keeps the Lip Seals spinning with the shaft and protects ..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 80 Millimeter Shaft.
This unit comes with one 80MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects i..
RPB-J-40MM - Type J Rudder Port Bearing for 40 Millimeter Rudder Stock.
* Must send in Lock Nut or Cap Nut for Correct Thread Pitch and Size.
Thread Size: Choose from available sizes.
Tides M..
RPB-J-1500 - Type J Rudder Port Bearing for 1 1/2 Inch Rudder Stock.
* Must send in Lock Nut or Cap Nut for Correct Thread Pitch and Size.
Thread Size: Choose from available sizes.
Tides Mari..
URB-STD-1500-00 - Upper Rudder Bearing Standard for a 1 1/2 Inch Rudder Stock.
The TidesMarine Upper Rudder Bearing-Standard (URB-STD) is designed to be mounted directly on ..
URB-LP-1500-00 - Upper Rudder Bearing Low Profile for a 1 1/2 Inch Rudder Stock.
The Tides Marine Upper Rudder Bearing-Low Profile (URB-LP) is designed to be installed on ve..
Spare Seal Carrier Kit for a StrongSeal 75 Millimeter Shaft.
This unit comes with one 75MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damag..
Spare Seal Carrier Kit for a SureSeal 75 Millimeter Shaft.
This unit comes with two 75MM Lip Seals and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 3 Inch Shaft.
This unit comes with two 3" Lip Seals and 2 Protective Covers that keeps the Lip Seals spinning with the shaft and protects them fr..
RPB-C-1250-00 - Rudder Bearing for a 1 1/4 Inch Rudder Stock.
Tides Marine TYPE-C Rudder Ports are for use in new construction or retrofits. They may be used with any hull material. They can b..
HS 6500-8000 - Blue Articulated Silicone Hose for use with the SureSeal Drip Free Self Aligning shaft seal. 6 1/2 inch x 8 inch...
SH-930 - Headboard Car Assembly.
Two Stainless Steel slides each measuring 3 inches in length spaced approximately 2 1/4 inches apart.
Aluminum (AISI 2024) headboard car (hardcoat anaodized).
..
RPB-I-1375 - Tides Marine Rudder Port Seal Type I (aye) for a 1 3/8 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
Spare Seal Carrier Kit for a 4 Inch Rudder Stock.
This unit comes with one 4 Inch Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage from du..
RPB-J-1375 - Type J Rudder Port Bearing for 1 3/8 Inch Rudder Stock.
* Must send in Lock Nut or Cap Nut for Correct Thread Pitch and Size.
Thread Size: Choose from available sizes.
Tides Mari..
LIP SEAL 7500 - Nitrile Lip Seal for a 7 1/2 Inch SureSeal or StrongSeal. Includes HAT-7500-02 Installation Tool.
Description
Measurement in Inches
Tides Mari..
Spare Seal Carrier Kit for a StrongSeal 70 Millimeter Shaft.
This unit comes with one 70MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damag..
Spare Seal Carrier Kit for a SureSeal 70 Millimeter Shaft.
This unit comes with two 70MM Lip Seals and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage..
Spare Seal Carrier Kit for a SureSeal 2 3/4 Inch Shaft.
This unit comes with two 2 3/4" Lip Seals and 2 Protective Covers that keeps the Lip Seals spinning with the shaft and protects them from dam..
Spare Seal Carrier Kit for a StrongSeal 2 3/4 Inch Shaft.
This unit comes with one 2 3/4 inch Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from da..
RUD COLLAR-5000 - 316 Stainless steel Rudder Collar for a 5 Inch rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit comes wi..
HS 6500-7000 - Blue Articulated Silicone Hose for use with the SureSeal Drip Free Self Aligning shaft seal. 6 1/2 inch x 7 inch...
SH-910-SST - Headboard Car Assembly.
Two Stainless Steel slides each measuring 3 inches in length spaced approximately 1 1/4 inches apart.
Stainless steel headboard car.
Headboard quick pin ..
URB-STD-1375-00 - Upper Rudder Bearing Standard for a 1 3/8 Inch Rudder Stock.
The TidesMarine Upper Rudder Bearing-Standard (URB-STD) is designed to be mounted directly on ..
URB-LP-1375-00 - Upper Rudder Bearing Low Profile for a 1 3/8 Inch Rudder Stock.
The Tides Marine Upper Rudder Bearing-Low Profile (URB-LP) is designed to be installed on ve..
RPBH-D-40MM-00 - Tides Marine Rudder Port Bearing Type D for a 40 Millimeter rudder stock.
Replacement Bearing and Seal...
RPBH-D-1500-00 - Tides Marine Rudder Port Bearing Type D for a 1 1/2 inch rudder stock.
Replacement Bearing and Seal...
RPB-D-40MM-00 - Tides Marine Rudder Port Bearing Type D for a 40 Millimeter rudder stock.
Includes Fiberglass Liner...
RPB-D-1500-00 - Tides Marine Rudder Port Bearing Type D for a 1 1/2 inch rudder stock.
Includes Fiberglass Liner.
..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 2 5/8 Inch Shaft.
This unit comes with two 2 5/8" Lip Seals and 2 Protective Covers that keeps the Lip Seals spinning with the shaft and protects..
Spare Seal Carrier Kit for a 3 3/4 Inch Rudder Stock.
This unit comes with one 3 3/4 Inch Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage..
RUD COLLAR-4500 - 316 Stainless steel Rudder Collar for a 4 1/2 Inch rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit come..
RPB-I-30MM - Tides Marine Rudder Port Seal Type I (aye) for a 30 Millimeter rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing br..
SmartSeal Temperature Sensor Remote for Single Engine Configuration, Panel Mount
..
SmartSeal Temperature Sensor Remote for Twin Engine Configuration, Panel Mount
..
FSK-0875 - SureSeal Drip Free Self Aligning Propeller Shaft Seal for a 7/8 Inch Propeller Shaft.
Parts Included in this Kit:
FSA-0875-XXXX-X x 1
Articulated Hose x 1
Clamps x 4
HAT-0875..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 65 Millimeter Shaft.
This unit comes with two 65MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects i..
Spare Seal Carrier Kit for a SureSeal 2 1/2 Inch Shaft.
This unit comes with two 2 1/2" Lip Seals and 2 Protective Covers that keeps the Lip Seals spinning with the shaft and protects them from dam..
Spare Seal Carrier Kit for a StrongSeal 2 1/2 Inch Shaft.
This unit comes with two 2 1/2" Lip Seals and 2 Protective Covers that keeps the Lip Seal spinning with the shaft and protects it from dama..
RPB-K-1250-00 - Tides Marine Rudder Port Seal Type K for a 1 1/4 inch rudder stock.
This is a Direct Replacement for the stuffing box on a BERTRAM rudder stock.
Tides Marine RPB TY..
LIP SEAL 8000 - Nitrile Lip Seal for a 8 Inch SureSeal or StrongSeal. Includes HAT-8000-02 Installation Tool.
Description
Measurement in Inches
Tides Marine P..
RPB-C-30MM-00 - Rudder Bearing for a 30 Millimeter Rudder Stock.
Tides Marine TYPE-C Rudder Ports are for use in new construction or retrofits. They may be used with any hull material. They ca..
SmartSeal Temperature Sensor Remote for a Single Engine, Bulkhead Mount
..
SmartSeal Temperature Sensor Remote for a Twin Engine configuration, Bulkhead Mount
..
Spare Seal Carrier Kit for a 3 1/2 Inch Rudder Stock.
This unit comes with one 3 1/2 Inch Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage..
Spare Seal Carrier Kit for a 3 1/2 Inch Rudder Stock.
This unit comes with one 3 1/2 Inch Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage..
RPBH-D-1375-00 - Tides Marine Rudder Port Bearing Type D for a 1 3/8 inch rudder stock.
Replacement Bearing and Seal...
RPB-D-1375-00 - Tides Marine Rudder Port Bearing Type D for a 1 3/8 inch rudder stock.
Includes Fiberglass Liner.
..
RPB-I-1250 - Tides Marine Rudder Port Seal Type I (aye) for a 1 1/4 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
RUD COLLAR-4000 - 316 Stainless steel Rudder Collar for a 4 Inch rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit comes wi..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 60 Millimeter Shaft.
This unit comes with two 60MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects i..
ONE-30M - seriesOne Drip Free Shaft Seal for a 30 Millimeter Propeller Shaft
Parts included in this kit:
ONE-A-30M x 1
Convoluted Hose x 1
Clamps x 4
Hat-MM30 x 1
&..
ONE-25M - seriesOne Drip Free Shaft Seal for a 25 Millimeter Propeller Shaft
Parts included in this kit:
ONE-A-25M x 1
Convoluted Hose x 1
Clamps x 4
Hat-MM25 x 1
&..
ONE-22M - seriesOne Drip Free Shaft Seal for a 22 Millimeter Propeller Shaft
Parts included in this kit:
ONE-A-22M x 1
Convoluted Hose x 1
Clamps x 4
Hat-MM22 x 1
&..
ONE-1250 - seriesOne Drip Free Shaft Seal for a 1 1/4 Inch Propeller Shaft
Parts included in this kit:
ONE-A-1250 x 1
Convoluted Hose x 1
Clamps x 4
Hat-1250-02 x 1
..
