Your shopping cart is empty!
RPB-C-1500-00 - Rudder Bearing for a 1 1/2 Inch Rudder Stock.
Tides Marine TYPE-C Rudder Ports are for use in new construction or retrofits. They may be used with any hull material. They can b..
URB-LP-60MM-00 - Upper Rudder Bearing Low Profile for a 60 Millimeter Rudder Stock.
The Tides Marine Upper Rudder Bearing-Low Profile (URB-LP) is designed to be installed on..
URB-LP-2375-00 - Upper Rudder Bearing Low Profile for a 2 3/8 Inch Rudder Stock.
The Tides Marine Upper Rudder Bearing-Low Profile (URB-LP) is designed to be installed on ve..
RPB-F-2750-00 - The Tides Marine RPB Type F Rudder Port Bearing for 2 3/4 Inch Rudder Stock.
is designed to be installed in rudder tubes which have been laminated or welded into a vessel’s hull. The ..
RPB-E-2750-00 - The Tides Marine RPB Type E Rudder Port Bearing for 2 3/4 Inch Rudder Stock.
is designed to be installed in rudder tubes which have been laminated or welded into a vessel’s hull. Th..
RPB-I-2250 - Tides Marine Rudder Port Seal Type I (aye) for a 2 1/4 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
RPB-K-2000-02 - Tides Marine Rudder Port Seal Type K for a 2 inch rudder stock.
This is a Direct Replacement for the stuffing box on a BUDDY DAVIS 2 inch rudder stock.
Tides Marine..
RPB-K-2000-01 - Tides Marine Rudder Port Seal Type K for a 2 inch rudder stock.
This is a Direct Replacement for the stuffing box on a VIKING 2 inch rudder stock.
Tides Marine RPB ..
RPB-K-2000-00 - Tides Marine Rudder Port Seal Type K for a 2 inch rudder stock.
This is a Direct Replacement for the stuffing box on a HATTERAS 2 inch rudder stock.
Tides Marine RP..
RPB-K-1925-00 - Tides Marine Rudder Port Seal Type K for a 1.925 inch rudder stock.
This is a Direct Replacement for the stuffing box on a BERTRAM 1.925 inch rudder stock.
Tides Ma..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 100 Millimeter Shaft.
This unit comes with two 100MM Lip Seals and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protect..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 4 Inch Shaft.
This unit comes with two 4" Lip Seals and 1 Protective Cover that keeps the Lip Seals spinning with the shaft and protects them fro..
URB-STD-2250-00 - Upper Rudder Bearing Standard for a 2 1/4 Inch Rudder Stock.
The TidesMarine Upper Rudder Bearing-Standard (URB-STD) is designed to be mounted directly on ..
URB-LP-2250-00 - Upper Rudder Bearing Low Profile for a 2 1/4 Inch Rudder Stock.
The Tides Marine Upper Rudder Bearing-Low Profile (URB-LP) is designed to be installed on ve..
RPB-F-2500-00 - The Tides Marine RPB Type F Rudder Port Bearing for 2 1/2 Inch Rudder Stock.
is designed to be installed in rudder tubes which have been laminated or welded into a vessel’s hull. The ..
RPB-E-2500-00 - The Tides Marine RPB Type E Rudder Port Bearing for 2 1/2 Inch Rudder Stock.
is designed to be installed in rudder tubes which have been laminated or welded into a vessel’s hull. Th..
TS-1375-4000 - Rudder Tube System for a 1 1/4 inch Rudder Stock.
Tube System Parts(1) FT-2500-3943 x 1(2) RPB-G-1375-03 x 1(3) SB-UBEAR-88 x 1(4) LIP SEAL F 1375 x 2(5) WASHER 1375-1 x 1
..
RPBH-D-2000-00 - Tides Marine Rudder Port Bearing Type D for a 2 inch rudder stock.
Replacement Bearing and Seal...
RPB-D-2000-00 - Tides Marine Rudder Port Bearing Type D for a 2 inch rudder stock.
Includes Fiberglass Liner.
..
RPB-I-2000 - Tides Marine Rudder Port Seal Type I (aye) for a 2 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronze po..
RPB-E-2375-00 - The Tides Marine RPB Type E Rudder Port Bearing for 2 3/8 Inch Rudder Stock.
is designed to be installed in rudder tubes which have been laminated or welded into a vessel’s hull. Th..
FSKM-35M - SureSeal Drip Free Self Aligning Propeller Shaft Seal for a 35 Millimeter Propeller Shaft.Parts Included in this Kit:
FSA-35M-XXXX-X x 1
Articulated Hose x 1
Clamps x 4
HAT-MM35-02 ..
FSK-1375 - SureSeal Drip Free Self Aligning Propeller Shaft Seal for a 1 3/8 Inch Propeller Shaft.Parts Included in this Kit:
FSA-1375-XXXX-X x 1
Articulated Hose x 1
Clamps x 4
HAT-1250-02 x ..
TS-40MM-400MM - Rudder Tube System for a 40 millimeter Rudder Stock.
Tube System Parts(1) FT-3000-1514 x 1(2) RPB-G-40MM-02 x 1(3) SB-UPBEAR-71 x 1(4) LIP SEAL F 40MM x 2(5) WASHER 40MM-3 x ..
TS-40MM-362MM - Rudder Tube System for a 40 millimeter Rudder Stock.
Tube System Parts(1) FT-3000-1364 x 1(2) RPB-G-40MM-02 x 1(3) SB-UPBEAR-71 x 1(4) LIP SEAL F 40MM x 2(5) WASHER 40MM-3 x ..
TS-40MM-2400 - Rudder Tube System for a 40 millimeter Rudder Stock.
Tube System Parts(1) FT-3000-2346 x 1(2) RPB-G-40MM-02 x 1(3) SB-UPBEAR-71 x 1(4) LIP SEAL F 40MM x 2(5) WASHER 40MM-4 x 1..
RPB-E-2250-00 - The Tides Marine RPB Type E Rudder Port Bearing for 2 1/4 Inch Rudder Stock.
is designed to be installed in rudder tubes which have been laminated or welded into a vessel’s hull. Th..
RPB-J-2000 - Type J Rudder Port Bearing for 2 Inch Rudder Stock.
* Must send in Lock Nut or Cap Nut for Correct Thread Pitch and Size.
Thread Size: Choose from available sizes.
Tides Marine R..
TS-25MM-1968 - Rudder Tube System for a 25 millimeter Rudder Stock.
Tube System Parts(1) FT-2500-1906 x 1(2) RPB-G-25MM-00 x 1(3) SB-UPBEAR-63 x 1(4) LIP SEAL 1000 x 1(5) WASHER 1000-2 x 1
..
URB-STD-50MM-00 - Upper Rudder Bearing Standard for a 50 Millimeter Rudder Stock.
The TidesMarine Upper Rudder Bearing-Standard (URB-STD) is designed to be mounted directly ..
URB-STD-2000-00 - Upper Rudder Bearing Standard for a 2 Inch Rudder Stock.
The TidesMarine Upper Rudder Bearing-Standard (URB-STD) is designed to be mounted directly on top ..
URB-LP-2000-00 - Upper Rudder Bearing Low Profile for a 2 Inch Rudder Stock.
The Tides Marine Upper Rudder Bearing-Low Profile (URB-LP) is designed to be installed on vessel..
RPB-K-1750-00 - Tides Marine Rudder Port Seal Type K for a 1 3/4 inch rudder stock.
This is a Direct Replacement for the stuffing box on a BERTRAM 1 3/4 inch rudder stock.
Tides Ma..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 95 Millimeter Shaft.
This unit comes with two 3 3/4" Lip Seals and 1 Protective Cover that keeps the Lip Seals spinning with the shaft and protec..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 3 3/4 Inch Shaft.
This unit comes with two 3 3/4" Lip Seals and 1 Protective Cover that keeps the Lip Seals spinning with the shaft and protects ..
RPB-F-2000-00 - The Tides Marine RPB Type F Rudder Port Bearing for 2 Inch Rudder Stock.
is designed to be installed in rudder tubes which have been laminated or welded into a vessel’s hull. The unit..
RPB-E-2000-00 - The Tides Marine RPB Type E Rudder Port Bearing for 2 Inch Rudder Stock.
is designed to be installed in rudder tubes which have been laminated or welded into a vessel’s hull. The un..
TS-1250-2600 - Rudder Tube System for a 1 1/4 inch Rudder Stock.
Tube System Parts(1) FRP-TUBE 2500 x 1(2) RPB-G-1250-02 x 1(3) SB-UBEAR-50 x 1(4) LIP SEAL 1250 x 2(5) WASHER 1250 x 1
..
TS-1250-2200 - Rudder Tube System for a 1 1/4 inch Rudder Stock.
Tube System Parts(1) FRP-TUBE 2500 x 1(2) RPB-G-1250-02 x 1(3) SB-UBEAR-50 x 1(4) LIP SEAL 1250 x 2(5) WASHER 1250 x 1
..
TS-1250-1700 - Rudder Tube System for a 1 1/4 inch Rudder Stock.
Tube System Parts(1) FT-2500-1637 x 1(2) RPB-G-1250-02 x 1(3) SB-UBEAR-58 x 1(4) LIP SEAL 1250 x 2(5) WASHER 1250 x 1
..
TS-1250-1550 - Rudder Tube System for a 1 1/4 inch Rudder Stock.
Tube System Parts(1) FT-2500-1470 x 1(2) RPB-G-1250-02 x 1(3) SB-UBEAR-50 x 1(4) LIP SEAL 1250 x 2(5) WASHER 1250 x 1
..
TS-1250-1425-1 - Rudder Tube System for a 1 1/4 inch Rudder Stock.
Tube System Parts(1) FT-2500-1345 x 1(2) RPB-G-1250-02 x 1(3) SB-UBEAR-50 x 1(4) LIP SEAL 1250 x 2(5) WASHER 1250 x 1
..
TS-1250-1300 - Rudder Tube System for a 1 1/4 inch Rudder Stock.
Tube System Parts(1) FRP TUBE-2000-1232 x 1(2) RPB-G-1250-02 x 1(3) SB-UBEAR-58 x 1(4) LIP SEAL 1250 x 2(5) WASHER 1250 x 1
..
TS-1250-1200-1 - Rudder Tube System for a 1 1/4 inch Rudder Stock.
Tube System Parts(1) FT-2500-1147 x 1(2) RPB-G-1500-23 x 1(3) SB-UPBEAR-58 x 1(4) LIP SEAL 1250 x 2(5) WASHER 1250 x 1
..
TS-1250-1200 - Rudder Tube System for a 1 1/4 inch Rudder Stock.
Tube System Parts(1) FRP TUBE-2000-1200 x 1(2) RPB-G-1250-00 x 1(3) RPB-H-1250-03 x 1(4) LIP SEAL 1250 x 2(5) SB-UPWASH-13x 1
..
TS-1250-1150 - Rudder Tube System for a 1 1/4 inch Rudder Stock.
Tube System Parts(1) FT-2500-1082 x 1(2) RPB-G-1250-02 x 1(3) SB-UPBEAR-58 x 1(4) LIP SEAL 1250 x 2(5) WASHER 1250 x 1
..
