Your shopping cart is empty!
RPB-KT-2000-01 - Tides Marine Rudder Port Seal Type K for a 2 inch rudder stock.
This is a Direct Replacement for the stuffing box and insert on a VIKING 2 inch rudder stock.INCLUDES:RPB-K-2000-01R..
RPB-KT-2000-00 - Tides Marine Rudder Port Seal Type K for a 2 inch rudder stock.
This is a Direct Replacement for the stuffing box on a HATTERAS 2 inch rudder stock.INCLUDES:RPB-K-2000-00RPB-KI-200..
SmartSeal Temperature Sensor for Twin Engines
The All New NEMA 2000 Tides Marine SmartSeal Temperature Sensor monitors the cooling water temperature of your shaft seals and displays a Warning Signa..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 130 Millimeter Shaft.
This unit comes with two 130MM Lip Seals and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protect..
URB-STD-70MM-00 - Upper Rudder Bearing Standard for a 70 Millimeter Rudder Stock.
The TidesMarine Upper Rudder Bearing-Standard (URB-STD) is designed to be mounted directly ..
URB-STD-2750-00 - Upper Rudder Bearing Standard for a 2 3/4 Inch Rudder Stock.
The TidesMarine Upper Rudder Bearing-Standard (URB-STD) is designed to be mounted directly on ..
URB-LP-70MM-01 - Upper Rudder Bearing Low Profile for a 70 Millimeter Rudder Stock.
The Tides Marine Upper Rudder Bearing-Low Profile (URB-LP) is designed to be installed on..
URB-LP-2750-00 - Upper Rudder Bearing Low Profile for a 2 3/4 Inch Rudder Stock.
The Tides Marine Upper Rudder Bearing-Low Profile (URB-LP) is designed to be installed on ve..
RPB-C-2250-00 - Rudder Bearing for a 2 1/4 Inch Rudder Stock.
Tides Marine TYPE-C Rudder Ports are for use in new construction or retrofits. They may be used with any hull material. They can b..
RPB-I-70MM - Tides Marine Rudder Port Seal Type I (aye) for a 70 Millimeter rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing br..
RPB-I-2750 - Tides Marine Rudder Port Seal Type I (aye) for a 2 3/4 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 125 Millimeter Shaft.
This unit comes with two 125MM Lip Seals and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protect..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 5 Inch Shaft.
This unit comes with two 5" Lip Seals and 1 Protective Cover that keeps the Lip Seals spinning with the shaft and protects them fro..
RPBH-D-2500-00 - Tides Marine Rudder Port Bearing Type D for a 2 1/2 inch rudder stock.
Replacement Bearing and Seal...
RPB-D-2500-00 - Tides Marine Rudder Port Bearing Type D for a 2 1/2 inch rudder stock.
Includes Fiberglass Liner.
..
TS-2000-4800 - Rudder Tube System for a 2 inch Rudder Stock.
Tube System Parts(1) FT-3735-4768 x 1(2) RPB-G-2000-22 x 1(3) SB-UPBEAR-24 x 1(4) LIP SEAL R 2000 x 2(5) WASHER 2000-8 x 1
..
TS-2000-2800 - Rudder Tube System for a 2 inch Rudder Stock.
Tube System Parts(1) FT-3735-2743 x 1(2) RPB-G-2000-16 x 1(3) SB-UPBEAR-24 x 1(4) LIP SEAL R 2000 x 2(5) WASHER 2000-8 x 1
..
TS-2000-2400-1 - Rudder Tube System for a 2 inch Rudder Stock.
Tube System Parts(1) FT-3735-2342 x 1(2) RPB-G-2000-30 x 1(3) SB-UPBEAR-87 x 1(4) LIP SEAL R 2000 x 2(5) WASHER 2000-7 x 1
..
TS-2000-2400 - Rudder Tube System for a 2 inch Rudder Stock.
Tube System Parts(1) FT-3735-2343 x 1(2) RPB-G-2000-16 x 1(3) SB-UPBEAR-24 x 1(4) LIP SEAL R 2000 x 2(5) WASHER 2000-8 x 1
..
TS-2000-1950 - Rudder Tube System for a 2 inch Rudder Stock.
Tube System Parts(1) FT-3735-1743 x 1(2) RPB-G-2000-16 x 1(3) SB-UPBEAR-24 x 1(4) LIP SEAL R 2000 x 2(5) WASHER 2000-8 x 1
..
TS-2000-1800 - Rudder Tube System for a 2 inch Rudder Stock.
Tube System Parts(1) FT-3735-1743 x 1(2) RPB-G-2000-16 x 1(3) SB-UPBEAR-24 x 1(4) LIP SEAL R 2000 x 2(5) WASHER 2000-8 x 1
..
TS-2000-1700 - Rudder Tube System for a 2 inch Rudder Stock.
Tube System Parts(1) FT-3735-1643 x 1(2) RPB-G-2000-16 x 1(3) SB-UPBEAR-24 x 1(4) LIP SEAL R 2000 x 2(5) WASHER 2000-8 x 1
..
TS-2000-1642 - Rudder Tube System for a 2 inch Rudder Stock.
Tube System Parts(1) FT-3735-1579 x 1(2) RPB-G-2000-19 x 1(3) SB-UPBEAR-49 x 1(4) LIP SEAL R 2000 x 2(5) WASHER 2000-9 x 1
..
TS-2000-1600 - Rudder Tube System for a 2 inch Rudder Stock.
Tube System Parts(1) FT-3735-1512 x 1(2) RPB-G-2000-19 x 1(3) SB-UPBEAR-49 x 1(4) LIP SEAL R 2000 x 2(5) WASHER 2000-9 x 1
..
TS-2000-1575 - Rudder Tube System for a 2 inch Rudder Stock.
Tube System Parts(1) FT-3735-1512 x 1(2) RPB-G-2000-19 x 1(3) SB-UPBEAR-49 x 1(4) LIP SEAL R 2000 x 2(5) WASHER 2000-9 x 1
..
TS-2000-1550 - Rudder Tube System for a 2 inch Rudder Stock.
Tube System Parts(1) FRP-TUBE-3735 x 1(2) RPB-H-2000-22 x 1(3) SB-UPBEAR-24 x 1(4) LIP SEAL R 2000 x 2(5) WASHER 2000-8 x 1
..
TS-2000-1437 - Rudder Tube System for a 2 inch Rudder Stock.
Tube System Parts(1) FRP-TUBE-3735 x 1(2) RPB-G-2000-19 x 1(3) SB-UPBEAR-49 x 1(4) LIP SEAL R 2000 x 2(5) WASHER 2000-9 x 1
..
RPB-E-4000-00 - The Tides Marine RPB Type E Rudder Port Bearing for 4 Inch Rudder Stock.
is designed to be installed in rudder tubes which have been laminated or welded into a vessel’s hull. The un..
FSKM-45M - SureSeal Drip Free Self Aligning Propeller Shaft Seal for a 45 Millimeter Propeller Shaft.
Parts Included in this Kit:
FSA-45M-XXXX-X x 1
Articulated Hose x 1
Clamps x 4
HAT-..
FSK-1750 - SureSeal Drip Free Self Aligning Propeller Shaft Seal for a 1 3/4 Inch Propeller Shaft.
Parts Included in this Kit:
FSA-1750-XXXX-X x 1
Articulated Hose x 1
Clamps x 4
HAT-17..
RPB-C-50MM-00 - Rudder Bearing for a 50 Millimeter Rudder Stock.
Tides Marine TYPE-C Rudder Ports are for use in new construction or retrofits. They may be used with any hull material. They ca..
RPB-C-2000-00 - Rudder Bearing for a 2 Inch Rudder Stock.
Tides Marine TYPE-C Rudder Ports are for use in new construction or retrofits. They may be used with any hull material. They can be mo..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 120 Millimeter Shaft.
This unit comes with two 120MM Lip Seals and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protect..
TS-50MM-1675 - Rudder Tube System for a 50 millimeter Rudder Stock.
Tube System Parts(1) FT-3735 x 1(2) SB-LOWBEAR-19 x 1(3) SB-UPBEAR-17 x 1(4) LIP SEAL 50MM x 2(5) WASHER 50MM x 1(6) RET R..
RPB-J-2500 - Type J Rudder Port Bearing for 2 1/2 Inch Rudder Stock.
* Must send in Lock Nut or Cap Nut for Correct Thread Pitch and Size.
Thread Size: Choose from available sizes.
Tides Mari..
FSK-1625 - SureSeal Drip Free Self Aligning Propeller Shaft Seal for a 1 5/8 Inch Propeller Shaft.Parts Included in this Kit:
FSA-1625-XXXX-X x 1
Articulated Hose x 1
Clamps x 4
HAT-1625 x 1
..
TS-50MM-300MM - Rudder Tube System for a 50 millimeter Rudder Stock.
Tube System Parts(1) FT-3475-1111 x 1(2) RPB-G-50MM-00 x 1(3) SB-UPBEAR-42 x 1(4) LIP SEAL 50MM x 2(5) WASHER 50MM-1 x 1
..
FSKM-40M - SureSeal Drip Free Self Aligning Propeller Shaft Seal for a 40 Millimeter Propeller Shaft.Parts Included in this Kit:
FSA-40M-XXXX-X x 1
Articulated Hose x 1
Clamps x 4
HAT-MM40-02 ..
FSKM-38M - SureSeal Drip Free Self Aligning Propeller Shaft Seal for a 38 Millimeter Propeller Shaft.Parts Included in this Kit:
FSA-38M-XXXX-X x 1
Articulated Hose x 1
Clamps x 4
HAT-MM38-02 ..
FSK-1500 - SureSeal Drip Free Self Aligning Propeller Shaft Seal for a 1 1/2 Inch Propeller Shaft.
Parts Included in this Kit:
FSA-1500-XXXX-X x 1
Articulated Hose x 1
Clamps x 4
HAT-15..
TS-50MM-500MM - Rudder Tube System for a 50 millimeter Rudder Stock.
Tube System Parts(1) FT-3475-1895 x 1(2) RPB-G-50MM-00 x 1(3) SB-UPBEAR-42 x 1(4) LIP SEAL 50MM x 2(5) WASHER 50MM-2 x 1
..
TS-2000-1200-1 - Rudder Tube System for a 2 inch Rudder Stock.
Tube System Parts(1) FT-3735-1143 x 1(2) RPB-G-2000-06 x 1(3) SB-UPBEAR-24 x 1(4) LIP SEAL R 2000 x 2(5) WASHER 2000-8 x 1
..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 115 Millimeter Shaft.
This unit comes with two 115MM Lip Seals and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protect..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 4 1/2 Inch Shaft.
This unit comes with two 4 1/2" Lip Seals and 1 Protective Cover that keeps the Lip Seals spinning with the shaft and protects ..
RPBH-D-2250-00 - Tides Marine Rudder Port Bearing Type D for a 2 1/4 inch rudder stock.
Replacement Bearing and Seal...
RPB-D-2250-00 - Tides Marine Rudder Port Bearing Type D for a 2 1/4 inch rudder stock.
Includes Fiberglass Liner.
..
