Your shopping cart is empty!
RPB-E-2500-00 - The Tides Marine RPB Type E Rudder Port Bearing for 2 1/2 Inch Rudder Stock.
is designed to be installed in rudder tubes which have been laminated or welded into a vessel’s hull. Th..
RPB-F-2500-00 - The Tides Marine RPB Type F Rudder Port Bearing for 2 1/2 Inch Rudder Stock.
is designed to be installed in rudder tubes which have been laminated or welded into a vessel’s hull. The ..
URB-LP-2250-00 - Upper Rudder Bearing Low Profile for a 2 1/4 Inch Rudder Stock.
The Tides Marine Upper Rudder Bearing-Low Profile (URB-LP) is designed to be installed on ve..
URB-STD-2250-00 - Upper Rudder Bearing Standard for a 2 1/4 Inch Rudder Stock.
The TidesMarine Upper Rudder Bearing-Standard (URB-STD) is designed to be mounted directly on ..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 4 Inch Shaft.
This unit comes with two 4" Lip Seals and 1 Protective Cover that keeps the Lip Seals spinning with the shaft and protects them fro..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 100 Millimeter Shaft.
This unit comes with two 100MM Lip Seals and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protect..
RPB-K-1925-00 - Tides Marine Rudder Port Seal Type K for a 1.925 inch rudder stock.
This is a Direct Replacement for the stuffing box on a BERTRAM 1.925 inch rudder stock.
Tides Ma..
RPB-K-2000-00 - Tides Marine Rudder Port Seal Type K for a 2 inch rudder stock.
This is a Direct Replacement for the stuffing box on a HATTERAS 2 inch rudder stock.
Tides Marine RP..
RPB-K-2000-01 - Tides Marine Rudder Port Seal Type K for a 2 inch rudder stock.
This is a Direct Replacement for the stuffing box on a VIKING 2 inch rudder stock.
Tides Marine RPB ..
RPB-K-2000-02 - Tides Marine Rudder Port Seal Type K for a 2 inch rudder stock.
This is a Direct Replacement for the stuffing box on a BUDDY DAVIS 2 inch rudder stock.
Tides Marine..
RPB-I-2250 - Tides Marine Rudder Port Seal Type I (aye) for a 2 1/4 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
RPB-E-2750-00 - The Tides Marine RPB Type E Rudder Port Bearing for 2 3/4 Inch Rudder Stock.
is designed to be installed in rudder tubes which have been laminated or welded into a vessel’s hull. Th..
RPB-F-2750-00 - The Tides Marine RPB Type F Rudder Port Bearing for 2 3/4 Inch Rudder Stock.
is designed to be installed in rudder tubes which have been laminated or welded into a vessel’s hull. The ..
URB-LP-2375-00 - Upper Rudder Bearing Low Profile for a 2 3/8 Inch Rudder Stock.
The Tides Marine Upper Rudder Bearing-Low Profile (URB-LP) is designed to be installed on ve..
URB-LP-60MM-00 - Upper Rudder Bearing Low Profile for a 60 Millimeter Rudder Stock.
The Tides Marine Upper Rudder Bearing-Low Profile (URB-LP) is designed to be installed on..
RPB-C-1500-00 - Rudder Bearing for a 1 1/2 Inch Rudder Stock.
Tides Marine TYPE-C Rudder Ports are for use in new construction or retrofits. They may be used with any hull material. They can b..
RPB-C-40MM-00 - Rudder Bearing for a 40 Millimeter Rudder Stock.
Tides Marine TYPE-C Rudder Ports are for use in new construction or retrofits. They may be used with any hull material. They ca..
TS-1500-0775 - Rudder Tube System for a 1 1/2 inch Rudder Stock.
Tube System Parts(1) FT-3000-0711 x 1(2) RPB-G-1500-15 x 1(3) SB-UBEAR-66 x 1(4) LIP SEAL 1500 x 2(5) WASHER 1500-4 x 1
..
TS-1500-1000 - Rudder Tube System for a 1 1/2 inch Rudder Stock.
Tube System Parts(1) FT-3000-0937 x 1(2) RPB-G-1500-15 x 1(3) SB-UBEAR-37 x 1(4) LIP SEAL 1500 x 2(5) WASHER 1500-4 x 1
..
TS-1500-1012 - Rudder Tube System for a 1 1/2 inch Rudder Stock.
Tube System Parts(1) FRP-TUBE-3000-3 x 1(2) RPB-G-1500-15 x 1(3) SB-UBEAR-37 x 1(4) LIP SEAL 1500 x 2(5) WASHER 1500-4 x 1
..
TS-1500-1012-1 - Rudder Tube System for a 1 1/2 inch Rudder Stock.
Tube System Parts(1) FT-3000-0975 x 1(2) RPB-H-1500-11 x 1(3) SB-UBEAR-37 x 1(4) LIP SEAL 1500 x 2(5) WASHER 1500-4 x 1
..
TS-1500-1100 - Rudder Tube System for a 1 1/2 inch Rudder Stock.
Tube System Parts(1) FRP-TUBE-3000-3 x 1(2) RPB-G-1500-19 x 1(3) SB-UBEAR-37 x 1(4) LIP SEAL 1500 x 2(5) WASHER 1500-4 x 1
..
TS-1500-1185 - Rudder Tube System for a 1 1/2 inch Rudder Stock.
Tube System Parts(1) FRP-TUBE-3000-3 x 1(2) RPB-G-1500-19 x 1(3) SB-UBEAR-37 x 1(4) LIP SEAL 1500 x 2(5) WASHER 1500-4 x 1
..
TS-1500-1210 - Rudder Tube System for a 1 1/2 inch Rudder Stock.
Tube System Parts(1) FT-3000-1147 x 1(2) RPB-G-1500-17 x 1(3) SB-UBEAR-37 x 1(4) LIP SEAL 1500 x 2(5) WASHER 1500-4 x 1
..
TS-1500-1300 - Rudder Tube System for a 1 1/2 inch Rudder Stock.
Tube System Parts(1) FT-3000-1237 x 1(2) RPB-G-1500-19 x 1(3) SB-UBEAR-37 x 1(4) LIP SEAL 1500 x 2(5) WASHER 1500-4 x 1
..
TS-1500-1425 - Rudder Tube System for a 1 1/2 inch Rudder Stock.
Tube System Parts(1) FRP-TUBE-3000-3 x 1(2) RPB-G-1500-17 x 1(3) SB-UBEAR-37 x 1(4) LIP SEAL 1500 x 2(5) WASHER 1500-4 x 1
..
TS-1500-1450 - Rudder Tube System for a 1 1/2 inch Rudder Stock.
Tube System Parts(1) FT-3000-1387 x 1(2) RPB-G-1500-15 x 1(3) SB-UBEAR-37 x 1(4) LIP SEAL 1500 x 2(5) WASHER 1500-4 x 1
..
TS-1500-1700 - Rudder Tube System for a 1 1/2 inch Rudder Stock.
Tube System Parts(1) FT-3000-1637 x 1(2) RPB-G-1500-17 x 1(3) SB-UBEAR-37 x 1(4) LIP SEAL 1500 x 2(5) WASHER 1500-4 x 1
..
RPB-J-2250 - Type J Rudder Port Bearing for 2 1/4 Inch Rudder Stock.
* Must send in Lock Nut or Cap Nut for Correct Thread Pitch and Size.
Thread Size: Choose from available sizes.
Tides Mari..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 105 Millimeter Shaft.
This unit comes with two 105MM Lip Seals and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protect..
URB-LP-2500-00 - Upper Rudder Bearing Low Profile for a 2 1/2 Inch Rudder Stock.
The Tides Marine Upper Rudder Bearing-Low Profile (URB-LP) is designed to be installed on ve..
URB-STD-2500-00 - Upper Rudder Bearing Standard for a 2 1/2 Inch Rudder Stock.
The TidesMarine Upper Rudder Bearing-Standard (URB-STD) is designed to be mounted directly on ..
RPB-E-3000-00 - The Tides Marine RPB Type E Rudder Port Bearing for 3 Inch Rudder Stock.
is designed to be installed in rudder tubes which have been laminated or welded into a vessel’s hull. The un..
RPB-F-3000-00 - The Tides Marine RPB Type F Rudder Port Bearing for 3 Inch Rudder Stock.
is designed to be installed in rudder tubes which have been laminated or welded into a vessel’s hull. The unit..
SmartSeal Temperature Sensor for Single Engines
The All New NEMA 2000 Tides Marine SmartSeal Temperature Sensor monitors the cooling water temperature of your shaft seal and displays a Warning Sign..
TS-45MM-1100 - Rudder Tube System for a 45 millimeter Rudder Stock.
Tube System Parts(1) FRP-TUBE-3475 x 1(2) SB-LOWBEAR-21 x 1(3) SB-UPBEAR-19 x 1(4) LIP SEAL F 45MM x 2(5) RET RING 267 x 1..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 4 1/4 Inch Shaft.
This unit comes with two 4 1/4" Lip Seals and 1 Protective Cover that keeps the Lip Seals spinning with the shaft and protects ..
RPB-F-3250-00 - The Tides Marine RPB Type F Rudder Port Bearing for 3 1/4 Inch Rudder Stock.
is designed to be installed in rudder tubes which have been laminated or welded into a vessel’s hull. The ..
RPB-C-1750-00 - Rudder Bearing for a 1 3/4 Inch Rudder Stock.
Tides Marine TYPE-C Rudder Ports are for use in new construction or retrofits. They may be used with any hull material. They can b..
TS-1500-1950 - Rudder Tube System for a 1 1/2 inch Rudder Stock.
Tube System Parts(1) FT-3000-1637 x 1(2) RPB-G-1500-17 x 1(3) SB-UBEAR-37 x 1(4) LIP SEAL 1500 x 2(5) WASHER 1500-4 x 1
..
RPB-E-3500-01 - The Tides Marine RPB Type E Rudder Port Bearing for 3 1/2 Inch Rudder Stock.
is designed to be installed in rudder tubes which have been laminated or welded into a vessel’s hull. Th..
RPB-F-3500-01 - The Tides Marine RPB Type F Rudder Port Bearing for 3 1/2 Inch Rudder Stock.
is designed to be installed in rudder tubes which have been laminated or welded into a vessel&rsquo..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 110 Millimeter Shaft.
This unit comes with two 110MM Lip Seals and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protect..
TS-1750-0800 - Rudder Tube System for a 1 3/4 inch Rudder Stock.
Tube System Parts(1) FT-2500-0750 x 1(2) RPB-G-1750-11 x 1(3) RPB-H-1750-15 x 1(4) LIP SEAL 1750 x 2(5) SB-UPWASH-14 x 1
..
TS-1750-0950 - Rudder Tube System for a 1 3/4 inch Rudder Stock.
Tube System Parts(1) FRP-TUBE-3000-3 x 1(2) RPB-G-1750-08 x 1(3) SB-UPBEAR-35 x 1(4) LIP SEAL 1750 x 2(5) WASHER 1750-1 x 1
..
TS-1750-1100 - Rudder Tube System for a 1 3/4 inch Rudder Stock.
Tube System Parts(1) FT-3000-1062 x 1(2) RPB-G-1750-05 x 1(3) SB-UPBEAR-35 x 1(4) LIP SEAL 1750 x 2(5) WASHER 1750-1 x 1
..
TS-1750-1225 - Rudder Tube System for a 1 3/4 inch Rudder Stock.
Tube System Parts(1) FT-2500-1175 x 1(2) RPB-G-1750-04 x 1(3) RPB-H-1750-04 x 1(4) LIP SEAL 1750 x 2(5) SB-UPWASH-14 x 1
..
TS-1750-1275 - Rudder Tube System for a 1 3/4 inch Rudder Stock.
Tube System Parts(1) FT-2500-1225 x 1(2) RPB-G-1750-04 x 1(3) RPB-H-1750-04 x 1(4) LIP SEAL 1750 x 2(5) SB-UPWASH-14 x 1
..
TS-1750-1287 - Rudder Tube System for a 1 3/4 inch Rudder Stock.
Tube System Parts(1) FT-3000-1250 x 1(2) RPB-H-1750-04 x 1(3) SB-UPBEAR-35 x 1(4) LIP SEAL 1750 x 2(5) WASHER 1750-1 x 1
..
TS-1750-1750 - Rudder Tube System for a 1 3/4 inch Rudder Stock.
Tube System Parts(1) FT-3000-1700 x 1(2) RPB-G-1750-09 x 1(3) SB-UPBEAR-35 x 1(4) LIP SEAL 1750 x 2(5) WASHER 1750-1 x 1
..
TS-1750-1800 - Rudder Tube System for a 1 3/4 inch Rudder Stock.
Tube System Parts(1) FT-3000-1750 x 1(2) RPB-G-1750-09 x 1(3) SB-UPBEAR-35 x 1(4) LIP SEAL 1750 x 2(5) WASHER 1750-1 x 1
..
TS-1750-1950 - Rudder Tube System for a 1 3/4 inch Rudder Stock.
Tube System Parts(1) FRP-TUBE-3000-3 x 1(2) RPB-G-1750-09 x 1(3) SB-UPBEAR-35 x 1(4) LIP SEAL 1750 x 2(5) WASHER 1750-1 x 1
..
TS-1750-2275 - Rudder Tube System for a 1 3/4 inch Rudder Stock.
Tube System Parts(1) FT-3000-2225 x 1(2) RPB-G-1750-09 x 1(3) SB-UPBEAR-35 x 1(4) LIP SEAL 1750 x 2(5) WASHER 1750-1 x 1
..
TS-1750-2300 - Rudder Tube System for a 1 3/4 inch Rudder Stock.
Tube System Parts(1) FT-3000-2250 x 1(2) RPB-G-1750-09 x 1(3) SB-UPBEAR-35 x 1(4) LIP SEAL 1750 x 2(5) WASHER 1750-1 x 1
..
TS-1750-2400 - Rudder Tube System for a 1 3/4 inch Rudder Stock.
Tube System Parts(1) FRP-TUBE-2500-2350 x 1(2) RPB-G-1750-04 x 1(3) RPB-H-1750-04 x 1(4) LIP SEAL 1750 x 2(5) SB-UPWASH-14 x 1
..
TS-1750-2400-1 - Rudder Tube System for a 1 3/4 inch Rudder Stock.
Tube System Parts(1) FT-3000-2350 x 1(2) RPB-G-1750-09 x 1(3) SB-UPBEAR-35 x 1(4) LIP SEAL 1750 x 2(5) WASHER 1750-1 x 1
..
TS-1750-2600 - Rudder Tube System for a 1 3/4 inch Rudder Stock.
Tube System Parts(1) FT-2500-2550 x 1(2) RPB-G-1750-04 x 1(3) RPB-H-1750-04 x 1(4) LIP SEAL 1750 x 2(5) SB-UPWASH-14 x 1
..
TS-1750-2800 - Rudder Tube System for a 1 3/4 inch Rudder Stock.
Tube System Parts(1) FT-2500-2750 x 1(2) RPB-G-1750-04 x 1(3) RPB-H-1750-04 x 1(4) LIP SEAL 1750 x 2(5) SB-UPWASH-14 x 1
..
RPB-I-2500 - Tides Marine Rudder Port Seal Type I (aye) for a 2 1/2 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
RPB-K-2490-00 - Tides Marine Rudder Port Seal Type K for a 2.490 inch rudder stock.
This is a Direct Replacement for the stuffing box on a BERTRAM 2.490 inch rudder stock.
Tides Ma..
RPB-K-2500-00 - Tides Marine Rudder Port Seal Type K for a 2 1/2 inch rudder stock.
This is a Direct Replacement for the stuffing box on a HATTERAS 2 1/2 inch rudder stock.
Tides M..
RPB-K-2500-02 - Tides Marine Rudder Port Seal Type K for a 2 1/2 inch rudder stock.
This is a Direct Replacement for the stuffing box on a VIKING 2 1/2 inch rudder stock.
Tides Mar..
RPB-D-2250-00 - Tides Marine Rudder Port Bearing Type D for a 2 1/4 inch rudder stock.
Includes Fiberglass Liner.
..
RPBH-D-2250-00 - Tides Marine Rudder Port Bearing Type D for a 2 1/4 inch rudder stock.
Replacement Bearing and Seal...
Spare Seal Carrier Kit for a SureSeal or StrongSeal 4 1/2 Inch Shaft.
This unit comes with two 4 1/2" Lip Seals and 1 Protective Cover that keeps the Lip Seals spinning with the shaft and protects ..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 115 Millimeter Shaft.
This unit comes with two 115MM Lip Seals and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protect..
TS-2000-1200-1 - Rudder Tube System for a 2 inch Rudder Stock.
Tube System Parts(1) FT-3735-1143 x 1(2) RPB-G-2000-06 x 1(3) SB-UPBEAR-24 x 1(4) LIP SEAL R 2000 x 2(5) WASHER 2000-8 x 1
..
