Your shopping cart is empty!
ONE-A-22M - seriesOne Drip Free Shaft Seal Housing Only for a 22 Millimeter Propeller Shaft
Parts included:
ONE-A-22M x 1
HAT-MM22
The Minimum Distance required from th..
ONE-A-25M - seriesOne Drip Free Shaft Seal Housing Only for a 25 Millimeter Propeller Shaft
Parts included:
ONE-A-25M x 1
HAT-MM25-02
The Minimum Distance required from..
ONE-A-30M - seriesOne Drip Free Shaft Seal Housing Only for a 30 Millimeter Propeller Shaft
Parts included:
ONE-A-30M x 1
HAT-MM30-02
The Minimum Distance required from..
RUD COLLAR-3500 - 316 Stainless steel Rudder Collar for a 3 1/2 Inch rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit come..
RUD COLLAR-90MM - 316 Stainless steel Rudder Collar for a 90 Millimeter rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit c..
RPB-J-1250 - Type J Rudder Port Bearing for 1 1/4 Inch Rudder Stock.
* Must send in Lock Nut or Cap Nut for Correct Thread Pitch and Size.
Thread Size: Choose from available sizes.
Tides Mari..
Spare Seal Carrier Kit for a StrongSeal 2 1/4 Inch Shaft.
This unit comes with two 2 1/4" Lip Seals and 2 Protective Covers that keeps the Lip Seal spinning with the shaft and protects it from dama..
Spare Seal Carrier Kit for a SureSeal 2 1/4 Inch Shaft.
This unit comes with two 2 1/4" Lip Seals and 2 Protective Covers that keeps the Lip Seals spinning with the shaft and protects them from dam..
URB-LP-1250-00 - Upper Rudder Bearing Low Profile for a 1 1/4 Inch Rudder Stock.
The Tides Marine Upper Rudder Bearing-Low Profile (URB-LP) is designed to be installed on ve..
URB-LP-30MM-00 - Upper Rudder Bearing Low Profile for a 30 Millimeter Rudder Stock.
The Tides Marine Upper Rudder Bearing-Low Profile (URB-LP) is designed to be installed on..
URB-STD-1250-00 - Upper Rudder Bearing Standard for a 1 1/4 Inch Rudder Stock.
The TidesMarine Upper Rudder Bearing-Standard (URB-STD) is designed to be mounted directly on ..
URB-STD-30MM-00 - Upper Rudder Bearing Standard for a 30 Millimeter Rudder Stock.
The TidesMarine Upper Rudder Bearing-Standard (URB-STD) is designed to be mounted directly ..
Spare Seal Carrier Kit for a StrongSeal 55 Millimeter Shaft.
This unit comes with two 55MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damag..
HS 5000-6000 - Blue Articulated Silicone Hose for use with the SureSeal Drip Free Self Aligning shaft seal. 5 inch x 6 inch...
HS 5500-6500 - Blue Articulated Silicone Hose for use with the SureSeal Drip Free Self Aligning shaft seal. 5 inch x 6 1/2 inch...
Spare Seal Carrier Kit for a 3 1/4 Inch Rudder Stock.
This unit comes with one 3 1/4 Inch Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage..
ONE-0750 - seriesOne Drip Free Shaft Seal for a 3/4 Inch Propeller Shaft
Parts included in this kit:
ONE-A-750 x 1
Convoluted Hose x 1
Clamps x 4
Hat-0750 x 1
..
ONE-0875 - seriesOne Drip Free Shaft Seal for a 7/8 Inch Propeller Shaft
Parts included in this kit:
ONE-A-0875 x 1
Convoluted Hose x 1
Clamps x 4
Hat-0875 x 1
&nbs..
ONE-1000 - seriesOne Drip Free Shaft Seal for a 1 Inch Propeller Shaft
Parts included in this kit:
ONE-A-1000 x 1
Convoluted Hose x 1
Clamps x 4
Hat-1000 x 1
..
ONE-1125 - seriesOne Drip Free Shaft Seal for a 1 1/8 Inch Propeller Shaft
Parts included in this kit:
ONE-A-1125 x 1
Convoluted Hose x 1
Clamps x 4
Hat-1125-02 x 1
..
ONE-1250 - seriesOne Drip Free Shaft Seal for a 1 1/4 Inch Propeller Shaft
Parts included in this kit:
ONE-A-1250 x 1
Convoluted Hose x 1
Clamps x 4
Hat-1250-02 x 1
..
ONE-22M - seriesOne Drip Free Shaft Seal for a 22 Millimeter Propeller Shaft
Parts included in this kit:
ONE-A-22M x 1
Convoluted Hose x 1
Clamps x 4
Hat-MM22 x 1
&..
ONE-25M - seriesOne Drip Free Shaft Seal for a 25 Millimeter Propeller Shaft
Parts included in this kit:
ONE-A-25M x 1
Convoluted Hose x 1
Clamps x 4
Hat-MM25 x 1
&..
ONE-30M - seriesOne Drip Free Shaft Seal for a 30 Millimeter Propeller Shaft
Parts included in this kit:
ONE-A-30M x 1
Convoluted Hose x 1
Clamps x 4
Hat-MM30 x 1
&..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 60 Millimeter Shaft.
This unit comes with two 60MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects i..
RUD COLLAR-4000 - 316 Stainless steel Rudder Collar for a 4 Inch rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit comes wi..
RPB-I-1250 - Tides Marine Rudder Port Seal Type I (aye) for a 1 1/4 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
RPB-D-1375-00 - Tides Marine Rudder Port Bearing Type D for a 1 3/8 inch rudder stock.
Includes Fiberglass Liner.
..
RPBH-D-1375-00 - Tides Marine Rudder Port Bearing Type D for a 1 3/8 inch rudder stock.
Replacement Bearing and Seal...
Spare Seal Carrier Kit for a 3 1/2 Inch Rudder Stock.
This unit comes with one 3 1/2 Inch Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage..
Spare Seal Carrier Kit for a 3 1/2 Inch Rudder Stock.
This unit comes with one 3 1/2 Inch Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage..
SmartSeal Temperature Sensor Remote for a Twin Engine configuration, Bulkhead Mount
..
SmartSeal Temperature Sensor Remote for a Single Engine, Bulkhead Mount
..
RPB-C-30MM-00 - Rudder Bearing for a 30 Millimeter Rudder Stock.
Tides Marine TYPE-C Rudder Ports are for use in new construction or retrofits. They may be used with any hull material. They ca..
LIP SEAL 8000 - Nitrile Lip Seal for a 8 Inch SureSeal or StrongSeal. Includes HAT-8000-02 Installation Tool.
Description
Measurement in Inches
Tides Marine P..
RPB-K-1250-00 - Tides Marine Rudder Port Seal Type K for a 1 1/4 inch rudder stock.
This is a Direct Replacement for the stuffing box on a BERTRAM rudder stock.
Tides Marine RPB TY..
Spare Seal Carrier Kit for a StrongSeal 2 1/2 Inch Shaft.
This unit comes with two 2 1/2" Lip Seals and 2 Protective Covers that keeps the Lip Seal spinning with the shaft and protects it from dama..
Spare Seal Carrier Kit for a SureSeal 2 1/2 Inch Shaft.
This unit comes with two 2 1/2" Lip Seals and 2 Protective Covers that keeps the Lip Seals spinning with the shaft and protects them from dam..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 65 Millimeter Shaft.
This unit comes with two 65MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects i..
FSK-0875 - SureSeal Drip Free Self Aligning Propeller Shaft Seal for a 7/8 Inch Propeller Shaft.
Parts Included in this Kit:
FSA-0875-XXXX-X x 1
Articulated Hose x 1
Clamps x 4
HAT-0875..
SmartSeal Temperature Sensor Remote for Twin Engine Configuration, Panel Mount
..
SmartSeal Temperature Sensor Remote for Single Engine Configuration, Panel Mount
..
RPB-I-30MM - Tides Marine Rudder Port Seal Type I (aye) for a 30 Millimeter rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing br..
RUD COLLAR-4500 - 316 Stainless steel Rudder Collar for a 4 1/2 Inch rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit come..
Spare Seal Carrier Kit for a 3 3/4 Inch Rudder Stock.
This unit comes with one 3 3/4 Inch Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 2 5/8 Inch Shaft.
This unit comes with two 2 5/8" Lip Seals and 2 Protective Covers that keeps the Lip Seals spinning with the shaft and protects..
RPB-D-1500-00 - Tides Marine Rudder Port Bearing Type D for a 1 1/2 inch rudder stock.
Includes Fiberglass Liner.
..
RPB-D-40MM-00 - Tides Marine Rudder Port Bearing Type D for a 40 Millimeter rudder stock.
Includes Fiberglass Liner...
RPBH-D-1500-00 - Tides Marine Rudder Port Bearing Type D for a 1 1/2 inch rudder stock.
Replacement Bearing and Seal...
RPBH-D-40MM-00 - Tides Marine Rudder Port Bearing Type D for a 40 Millimeter rudder stock.
Replacement Bearing and Seal...
URB-LP-1375-00 - Upper Rudder Bearing Low Profile for a 1 3/8 Inch Rudder Stock.
The Tides Marine Upper Rudder Bearing-Low Profile (URB-LP) is designed to be installed on ve..
URB-STD-1375-00 - Upper Rudder Bearing Standard for a 1 3/8 Inch Rudder Stock.
The TidesMarine Upper Rudder Bearing-Standard (URB-STD) is designed to be mounted directly on ..
SH-910-SST - Headboard Car Assembly.
Two Stainless Steel slides each measuring 3 inches in length spaced approximately 1 1/4 inches apart.
Stainless steel headboard car.
Headboard quick pin ..
HS 6500-7000 - Blue Articulated Silicone Hose for use with the SureSeal Drip Free Self Aligning shaft seal. 6 1/2 inch x 7 inch...
RUD COLLAR-5000 - 316 Stainless steel Rudder Collar for a 5 Inch rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit comes wi..
Spare Seal Carrier Kit for a StrongSeal 2 3/4 Inch Shaft.
This unit comes with one 2 3/4 inch Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from da..
Spare Seal Carrier Kit for a SureSeal 2 3/4 Inch Shaft.
This unit comes with two 2 3/4" Lip Seals and 2 Protective Covers that keeps the Lip Seals spinning with the shaft and protects them from dam..
Spare Seal Carrier Kit for a SureSeal 70 Millimeter Shaft.
This unit comes with two 70MM Lip Seals and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage..
Spare Seal Carrier Kit for a StrongSeal 70 Millimeter Shaft.
This unit comes with one 70MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damag..
LIP SEAL 7500 - Nitrile Lip Seal for a 7 1/2 Inch SureSeal or StrongSeal. Includes HAT-7500-02 Installation Tool.
Description
Measurement in Inches
Tides Mari..
RPB-J-1375 - Type J Rudder Port Bearing for 1 3/8 Inch Rudder Stock.
* Must send in Lock Nut or Cap Nut for Correct Thread Pitch and Size.
Thread Size: Choose from available sizes.
Tides Mari..
Spare Seal Carrier Kit for a 4 Inch Rudder Stock.
This unit comes with one 4 Inch Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage from du..
RPB-I-1375 - Tides Marine Rudder Port Seal Type I (aye) for a 1 3/8 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
SH-930 - Headboard Car Assembly.
Two Stainless Steel slides each measuring 3 inches in length spaced approximately 2 1/4 inches apart.
Aluminum (AISI 2024) headboard car (hardcoat anaodized).
..
HS 6500-8000 - Blue Articulated Silicone Hose for use with the SureSeal Drip Free Self Aligning shaft seal. 6 1/2 inch x 8 inch...
