TPS-DC-1M N2K Drop Cable
SmartSeal N2K Drop Cable 1 Meter ..
TPS-DC-10M N2K Drop Cable
SmartSeal N2K Drop Cable 10 Meters in length. ..
SMARTSEAL REMOTE SIREN
SP-SS-SIREN - SmartSeal Temperature Sensor Remote Siren   ..
Universal Joint w/10mm Stud - SH-402
SH-402 - Universal Joint with a 10mm stud for use in the Tides Marine SailTrack System..
Small Batten Car Receptacle - SH-200A-H
SH-200A-H - Tides Marine Small Batten receptacle ONLY. This receptacle accepts flat battens up to 1 5/8 inch wide, and up to 1/2 inch in diameter. ..
Small Batten Car - SH-200A
SH-200A - Tides Marine Small Batten receptacle with an SH-400 slide. This receptacle accepts flat battens up to 1 5/8 inch wide, and up to 1/2 inch in diameter. ..
Luff Slide - SH-600
SH-600 - 1 3/8 inch Luff slide for use in the Tides Marine SailTrack System ..
Large Batten Car Receptacle - SH-200B-H
SH-200B-H - Tides Marine Large Batten receptacle ONLY. This receptacle accepts flat battens up to 2 inch wide, and up to 3/4 inch in diameter. ..
Large Batten Car - SH-200B
SH-200B - Tides Marine Large Batten receptacle with an SH-400 slide. This receptacle accepts flat battens up to 2 inch wide, and up to 3/4 inch in diameter. ..
Headboard Slide - SH-500
SH-500 - 3 inch Headboard slide for use in the Tides Marine SailTrack System ..
Custom Headboard Slide - SH-930
SH-930 - Headboard Car Assembly. Two Stainless Steel slides each measuring 3 inches in length spaced approximately 2 1/4 inches apart. Aluminum (AISI 2024) headboard car (hardcoat anaodized). ..
Custom Headboard Slide - SH-910-SST
SH-910-SST - Headboard Car Assembly. Two Stainless Steel slides each measuring 3 inches in length spaced approximately 1 1/4 inches apart. Stainless steel headboard car. Headboard quick pin ..
Battslide - SH-403
SH-403 - 2 inch slide to accept the original battslide receptacles for use in the Tides Marine SailTrack System..
2 Inch Slide w/Universal - SH-400
SH-400 SS - A 2 inch Slide with a Universal Joint and 10mm Stud. ..
2 Inch Reef Slide - SH-401
SH-401 - A 2 inch Reef Slide for use in the Tides Marine SailTrack System ..
Slide Pin Kit
Slide Pin Kit Assortment of Pins and Rings for the Tides Marine SH-401 SS, SH-500 SS and SH-600 SS Slides ..
ONE-A-30M
$198.74
ONE-A-30M - seriesOne Drip Free Shaft Seal Housing Only for a 30 Millimeter Propeller Shaft Parts included: ONE-A-30M x 1 HAT-MM30-02    The Minimum Distance required from..
ONE-A-25M
$198.74
ONE-A-25M - seriesOne Drip Free Shaft Seal Housing Only for a 25 Millimeter Propeller Shaft Parts included: ONE-A-25M x 1 HAT-MM25-02    The Minimum Distance required from..
ONE-A-22M
$198.74
ONE-A-22M - seriesOne Drip Free Shaft Seal Housing Only for a 22 Millimeter Propeller Shaft Parts included: ONE-A-22M x 1 HAT-MM22    The Minimum Distance required from th..
ONE-A-1250
$198.74
ONE-A-1250 - seriesOne Drip Free Shaft Seal for a 1 1/4 Inch Propeller Shaft, Housing Only Parts Included: ONE-A-1250 x 1 HAT-1250-02     The Minimum Distance require..
ONE-A-1125
$198.74
ONE-A-1125 - seriesOne Drip Free Shaft Seal for a 1 1/8 Inch Propeller Shaft, Housing Only Parts Included: ONE-A-1125 x 1 HAT-1125-02     The Minimum Distance require..
ONE-A-1000
$198.74
ONE-A-1000 - seriesOne Drip Free Shaft Seal for a 1 Inch Propeller Shaft, Housing Only Parts Included: ONE-A-1000 x 1 HAT-1000-02     The Minimum Distance required fr..
ONE-A-0875
$198.74
ONE-A-0875 - seriesOne Drip Free Shaft Seal for a 7/8 Inch Propeller Shaft, Housing Only Parts included: ONE-A-0875 x 1 HAT-0875-02    The Minimum Distance required from t..
ONE-A-0750
$198.74
ONE-0750 - seriesOne Drip Free Shaft Seal for a 3/4 Inch Propeller Shaft, Housing Only Parts included : ONE-A-750 x 1 HAT-0750    The Minimum Distance required from the en..
ONE-30M
$222.29
ONE-30M - seriesOne Drip Free Shaft Seal for a 30 Millimeter Propeller Shaft Parts included in this kit: ONE-A-30M x 1 Convoluted Hose x 1 Clamps x 4 Hat-MM30 x 1    &..
ONE-25M
$222.29
ONE-25M - seriesOne Drip Free Shaft Seal for a 25 Millimeter Propeller Shaft Parts included in this kit: ONE-A-25M x 1 Convoluted Hose x 1 Clamps x 4 Hat-MM25 x 1    &..
ONE-22M
$222.29
ONE-22M - seriesOne Drip Free Shaft Seal for a 22 Millimeter Propeller Shaft Parts included in this kit: ONE-A-22M x 1 Convoluted Hose x 1 Clamps x 4 Hat-MM22 x 1    &..
ONE-1250
$222.29
ONE-1250 - seriesOne Drip Free Shaft Seal for a 1 1/4 Inch Propeller Shaft Parts included in this kit: ONE-A-1250 x 1 Convoluted Hose x 1 Clamps x 4 Hat-1250-02 x 1    ..
ONE-1125
$222.29
ONE-1125 - seriesOne Drip Free Shaft Seal for a 1 1/8 Inch Propeller Shaft Parts included in this kit: ONE-A-1125 x 1 Convoluted Hose x 1 Clamps x 4 Hat-1125-02 x 1    ..
ONE-1000
$222.29
ONE-1000 - seriesOne Drip Free Shaft Seal for a 1 Inch Propeller Shaft Parts included in this kit: ONE-A-1000 x 1 Convoluted Hose x 1 Clamps x 4 Hat-1000 x 1     ..
ONE-0875
$222.29
ONE-0875 - seriesOne Drip Free Shaft Seal for a 7/8 Inch Propeller Shaft Parts included in this kit: ONE-A-0875 x 1 Convoluted Hose x 1 Clamps x 4 Hat-0875 x 1    &nbs..
ONE-0750
$222.29
ONE-0750 - seriesOne Drip Free Shaft Seal for a 3/4 Inch Propeller Shaft Parts included in this kit: ONE-A-750 x 1 Convoluted Hose x 1 Clamps x 4 Hat-0750 x 1     ..
SCREW-PLASTITE
SCREW-PLASTITE - Screws for the SureSeal Shaft Seal Housing ..
External SailTrack
External SailTrack - 5/8, 7/8, 1 inch or Other     ..
CMPE SailTrack
CMPE SailTrack   Used for Mast's that do not have an external T-Track installed on the mast. This SailTrack System will come with mounting clips that you install onto the mast to accept..
Internal Round SailTrack
Internal Round SailTrack - Letters A thru G - Lip Thickness 11 thru 17   Available Track Profiles         ..
Internal Flat SailTrack
Internal Flat SailTrack - Letters A thru R  - Lip Thickness 1 thru 8   Available Track Profiles   ..
CMPE Fasteners
CMPE Fasteners for the Tides Marine CMPE SailTrack. Uses a #10 Stainless Steel Pan Head Machine Screw (Not Supplied)   ..
RPB-I-70MM
$648.12
RPB-I-70MM - Tides Marine Rudder Port Seal Type I (aye) for a 70 Millimeter rudder stock.   Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing br..
RPB-I-5500
$2,136.49
RPB-I-5500 - Tides Marine Rudder Port Seal Type I (aye) for a 5 1/2 inch rudder stock.   Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
RPB-I-5250
$1,967.70
RPB-I-5250 - Tides Marine Rudder Port Seal Type I (aye) for a 5 1/4 inch rudder stock.   Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
RPB-I-5000
$1,798.92
RPB-I-5000 - Tides Marine Rudder Port Seal Type I (aye) for a 5 inch rudder stock.   Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronze po..
RPB-I-4500
$1,465.89
RPB-I-4500 - Tides Marine Rudder Port Seal Type I (aye) for a 4 1/2 inch rudder stock.   Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
RPB-I-40MM
$345.86
RPB-I-40MM - Tides Marine Rudder Port Seal Type I (aye) for a 40 Millimeter rudder stock.   Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing br..
RPB-I-4000
$1,132.88
RPB-I-4000 - Tides Marine Rudder Port Seal Type I (aye) for a 4 inch rudder stock.   Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronze po..
RPB-I-3750
$970.42
RPB-I-3750 - Tides Marine Rudder Port Seal Type I (aye) for a 3 3/4 inch rudder stock.   Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
RPB-I-3500
$970.42
RPB-I-3500 - Tides Marine Rudder Port Seal Type I (aye) for a 3 1/2 inch rudder stock.   Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
RPB-I-3250
$931.49
RPB-I-3250 - Tides Marine Rudder Port Seal Type I (aye) for a 3 1/4 inch rudder stock.   Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
RPB-I-30MM
$250.39
RPB-I-30MM - Tides Marine Rudder Port Seal Type I (aye) for a 30 Millimeter rudder stock.   Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing br..
RPB-I-3000
$761.90
RPB-I-3000 - Tides Marine Rudder Port Seal Type I (aye) for a 3 inch rudder stock.   Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronze po..
Showing 401 to 450 of 920 (19 Pages)