Your shopping cart is empty!
SH-402 - Universal Joint with a 10mm stud for use in the Tides Marine SailTrack System..
SH-200A-H - Tides Marine Small Batten receptacle ONLY. This receptacle accepts flat battens up to 1 5/8 inch wide, and up to 1/2 inch in diameter.
..
SH-200A - Tides Marine Small Batten receptacle with an SH-400 slide.
This receptacle accepts flat battens up to 1 5/8 inch wide, and up to 1/2 inch in diameter.
..
SH-600 - 1 3/8 inch Luff slide for use in the Tides Marine SailTrack System
..
SH-200B-H - Tides Marine Large Batten receptacle ONLY. This receptacle accepts flat battens up to 2 inch wide, and up to 3/4 inch in diameter.
..
SH-200B - Tides Marine Large Batten receptacle with an SH-400 slide. This receptacle accepts flat battens up to 2 inch wide, and up to 3/4 inch in diameter.
..
SH-500 - 3 inch Headboard slide for use in the Tides Marine SailTrack System
..
SH-930 - Headboard Car Assembly.
Two Stainless Steel slides each measuring 3 inches in length spaced approximately 2 1/4 inches apart.
Aluminum (AISI 2024) headboard car (hardcoat anaodized).
..
SH-910-SST - Headboard Car Assembly.
Two Stainless Steel slides each measuring 3 inches in length spaced approximately 1 1/4 inches apart.
Stainless steel headboard car.
Headboard quick pin ..
SH-403 - 2 inch slide to accept the original battslide receptacles for use in the Tides Marine SailTrack System..
SH-400 SS - A 2 inch Slide with a Universal Joint and 10mm Stud.
..
SH-401 - A 2 inch Reef Slide for use in the Tides Marine SailTrack System
..
Slide Pin Kit
Assortment of Pins and Rings for the Tides Marine SH-401 SS, SH-500 SS and SH-600 SS Slides
..
ONE-A-30M - seriesOne Drip Free Shaft Seal Housing Only for a 30 Millimeter Propeller Shaft
Parts included:
ONE-A-30M x 1
HAT-MM30-02
The Minimum Distance required from..
ONE-A-25M - seriesOne Drip Free Shaft Seal Housing Only for a 25 Millimeter Propeller Shaft
Parts included:
ONE-A-25M x 1
HAT-MM25-02
The Minimum Distance required from..
ONE-A-22M - seriesOne Drip Free Shaft Seal Housing Only for a 22 Millimeter Propeller Shaft
Parts included:
ONE-A-22M x 1
HAT-MM22
The Minimum Distance required from th..
ONE-A-1250 - seriesOne Drip Free Shaft Seal for a 1 1/4 Inch Propeller Shaft, Housing Only
Parts Included:
ONE-A-1250 x 1
HAT-1250-02
The Minimum Distance require..
ONE-A-1125 - seriesOne Drip Free Shaft Seal for a 1 1/8 Inch Propeller Shaft, Housing Only
Parts Included:
ONE-A-1125 x 1
HAT-1125-02
The Minimum Distance require..
ONE-A-1000 - seriesOne Drip Free Shaft Seal for a 1 Inch Propeller Shaft, Housing Only
Parts Included:
ONE-A-1000 x 1
HAT-1000-02
The Minimum Distance required fr..
ONE-A-0875 - seriesOne Drip Free Shaft Seal for a 7/8 Inch Propeller Shaft, Housing Only
Parts included:
ONE-A-0875 x 1
HAT-0875-02
The Minimum Distance required from t..
ONE-0750 - seriesOne Drip Free Shaft Seal for a 3/4 Inch Propeller Shaft, Housing Only
Parts included :
ONE-A-750 x 1
HAT-0750
The Minimum Distance required from the en..
ONE-30M - seriesOne Drip Free Shaft Seal for a 30 Millimeter Propeller Shaft
Parts included in this kit:
ONE-A-30M x 1
Convoluted Hose x 1
Clamps x 4
Hat-MM30 x 1
&..
ONE-25M - seriesOne Drip Free Shaft Seal for a 25 Millimeter Propeller Shaft
Parts included in this kit:
ONE-A-25M x 1
Convoluted Hose x 1
Clamps x 4
Hat-MM25 x 1
&..
ONE-22M - seriesOne Drip Free Shaft Seal for a 22 Millimeter Propeller Shaft
Parts included in this kit:
ONE-A-22M x 1
Convoluted Hose x 1
Clamps x 4
Hat-MM22 x 1
&..
ONE-1250 - seriesOne Drip Free Shaft Seal for a 1 1/4 Inch Propeller Shaft
Parts included in this kit:
ONE-A-1250 x 1
Convoluted Hose x 1
Clamps x 4
Hat-1250-02 x 1
..
ONE-1125 - seriesOne Drip Free Shaft Seal for a 1 1/8 Inch Propeller Shaft
Parts included in this kit:
ONE-A-1125 x 1
Convoluted Hose x 1
Clamps x 4
Hat-1125-02 x 1
..
ONE-1000 - seriesOne Drip Free Shaft Seal for a 1 Inch Propeller Shaft
Parts included in this kit:
ONE-A-1000 x 1
Convoluted Hose x 1
Clamps x 4
Hat-1000 x 1
..
ONE-0875 - seriesOne Drip Free Shaft Seal for a 7/8 Inch Propeller Shaft
Parts included in this kit:
ONE-A-0875 x 1
Convoluted Hose x 1
Clamps x 4
Hat-0875 x 1
&nbs..
ONE-0750 - seriesOne Drip Free Shaft Seal for a 3/4 Inch Propeller Shaft
Parts included in this kit:
ONE-A-750 x 1
Convoluted Hose x 1
Clamps x 4
Hat-0750 x 1
..
CMPE SailTrack
Used for Mast's that do not have an external T-Track installed on the mast. This SailTrack System will come with mounting clips that you install onto the mast to accept..
Internal Round SailTrack - Letters A thru G - Lip Thickness 11 thru 17
Available Track Profiles
..
Internal Flat SailTrack - Letters A thru R - Lip Thickness 1 thru 8
Available Track Profiles
..
CMPE Fasteners for the Tides Marine CMPE SailTrack.
Uses a #10 Stainless Steel Pan Head Machine Screw (Not Supplied)
..
RPB-I-70MM - Tides Marine Rudder Port Seal Type I (aye) for a 70 Millimeter rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing br..
RPB-I-5500 - Tides Marine Rudder Port Seal Type I (aye) for a 5 1/2 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
RPB-I-5250 - Tides Marine Rudder Port Seal Type I (aye) for a 5 1/4 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
RPB-I-5000 - Tides Marine Rudder Port Seal Type I (aye) for a 5 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronze po..
RPB-I-4500 - Tides Marine Rudder Port Seal Type I (aye) for a 4 1/2 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
RPB-I-40MM - Tides Marine Rudder Port Seal Type I (aye) for a 40 Millimeter rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing br..
RPB-I-4000 - Tides Marine Rudder Port Seal Type I (aye) for a 4 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronze po..
RPB-I-3750 - Tides Marine Rudder Port Seal Type I (aye) for a 3 3/4 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
RPB-I-3500 - Tides Marine Rudder Port Seal Type I (aye) for a 3 1/2 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
RPB-I-3250 - Tides Marine Rudder Port Seal Type I (aye) for a 3 1/4 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
RPB-I-30MM - Tides Marine Rudder Port Seal Type I (aye) for a 30 Millimeter rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing br..
RPB-I-3000 - Tides Marine Rudder Port Seal Type I (aye) for a 3 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronze po..
RPB-I-2750 - Tides Marine Rudder Port Seal Type I (aye) for a 2 3/4 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
RPB-I-25MM - Tides Marine Rudder Port Seal Type I (aye) for a 25 Millimeter rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing br..
RPB-I-2500 - Tides Marine Rudder Port Seal Type I (aye) for a 2 1/2 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
RPB-I-2250 - Tides Marine Rudder Port Seal Type I (aye) for a 2 1/4 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
RPB-I-2000 - Tides Marine Rudder Port Seal Type I (aye) for a 2 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronze po..
RPB-I-1750 - Tides Marine Rudder Port Seal Type I (aye) for a 1 3/4 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
RPB-I-1500 - Tides Marine Rudder Port Seal Type I (aye) for a 1 1/2 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
RPB-I-1375 - Tides Marine Rudder Port Seal Type I (aye) for a 1 3/8 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
RPB-I-1250 - Tides Marine Rudder Port Seal Type I (aye) for a 1 1/4 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronz..
RPB-I-1000 - Tides Marine Rudder Port Seal Type I (aye) for a 1 inch rudder stock.
Tides Marine TYPE-I Rudder Seals are retrofit units which are used with existing bronze po..
RUD COLLAR-90MM - 316 Stainless steel Rudder Collar for a 90 Millimeter rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit c..
RUD COLLAR-70MM - 316 Stainless steel Rudder Collar for a 70 Millimeter rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit c..
RUD COLLAR-50MM - 316 Stainless steel Rudder Collar for a 50 Millimeter rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit c..
RUD COLLAR-5000 - 316 Stainless steel Rudder Collar for a 5 Inch rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit comes wi..
RUD COLLAR-4500 - 316 Stainless steel Rudder Collar for a 4 1/2 Inch rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit come..
RUD COLLAR-40MM - 316 Stainless steel Rudder Collar for a 40 Millimeter rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit c..
RUD COLLAR-4000 - 316 Stainless steel Rudder Collar for a 4 Inch rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit comes wi..
RUD COLLAR-3500 - 316 Stainless steel Rudder Collar for a 3 1/2 Inch rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit come..
RUD COLLAR-30MM - 316 Stainless steel Rudder Collar for a 30 Millimeter rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit c..
RUD COLLAR-3000 - 316 Stainless steel Rudder Collar for a 3 Inch rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit comes wi..
RUD COLLAR-2750 - 316 Stainless steel Rudder Collar for a 2 3/4 Inch rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit come..
RUD COLLAR-2500 - 316 Stainless steel Rudder Collar for a 2 1/2 Inch rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit come..
RUD COLLAR-2250 - 316 Stainless steel Rudder Collar for a 2 1/4 Inch rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit come..
RUD COLLAR-2000 - 316 Stainless steel Rudder Collar for a 2 Inch rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit comes wi..
RUD COLLAR-1750 - 316 Stainless steel Rudder Collar for a 1 3/4 Inch rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit come..
RUD COLLAR-1500 - 316 Stainless steel Rudder Collar for a 1 1/2 Inch rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit come..
RUD COLLAR-1375 - 316 Stainless steel Rudder Collar for a 1 3/8 Inch rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit come..
RUD COLLAR-1250 - 316 Stainless steel Rudder Collar for a 1 1/4 Inch rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit come..
RUD COLLAR-1000 - 316 Stainless steel Rudder Collar for a 1 Inch rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit comes wi..
RUD COLLAR-0875 - 316 Stainless steel Rudder Collar for a 7/8 Inch rudder stock.
Tides Marine Rudder Collars are for use on motor vessels. Machined from high grade stainless steel, each unit comes ..
RPBH-D-4500-00 - Tides Marine Rudder Port Bearing Type D for a 4 1/2 inch rudder stock.
Replacement Bearing and Seal...
RPBH-D-4250-00 - Tides Marine Rudder Port Bearing Type D for a 4 1/4 inch rudder stock.
Replacement Bearing and Seal...
RPBH-D-40MM-00 - Tides Marine Rudder Port Bearing Type D for a 40 Millimeter rudder stock.
Replacement Bearing and Seal...
RPBH-D-4000-00 - Tides Marine Rudder Port Bearing Type D for a 4 inch rudder stock.
Replacement Bearing and Seal...
RPBH-D-3500-00 - Tides Marine Rudder Port Bearing Type D for a 3 1/2 inch rudder stock.
Replacement Bearing and Seal...
RPBH-D-30MM-00 - Tides Marine Rudder Port Bearing Type D for a 30 Millimeter rudder stock.
Replacement Bearing and Seal...
RPBH-D-3000-00 - Tides Marine Rudder Port Bearing Type D for a 3 inch rudder stock.
Replacement Bearing and Seal...
RPBH-D-2750-00 - Tides Marine Rudder Port Bearing Type D for a 2 3/4 inch rudder stock.
Replacement Bearing and Seal...
RPBH-D-25MM-00 - Tides Marine Rudder Port Bearing Type D for a 25 Millimeter rudder stock.
Replacement Bearing and Seal...
RPBH-D-2500-00 - Tides Marine Rudder Port Bearing Type D for a 2 1/2 inch rudder stock.
Replacement Bearing and Seal...
RPBH-D-2250-00 - Tides Marine Rudder Port Bearing Type D for a 2 1/4 inch rudder stock.
Replacement Bearing and Seal...
RPBH-D-2000-00 - Tides Marine Rudder Port Bearing Type D for a 2 inch rudder stock.
Replacement Bearing and Seal...
RPBH-D-1750-00 - Tides Marine Rudder Port Bearing Type D for a 1 3/4 inch rudder stock.
Replacement Bearing and Seal...
RPBH-D-1500-00 - Tides Marine Rudder Port Bearing Type D for a 1 1/2 inch rudder stock.
Replacement Bearing and Seal...
RPBH-D-1375-00 - Tides Marine Rudder Port Bearing Type D for a 1 3/8 inch rudder stock.
Replacement Bearing and Seal...
RPBH-D-1250-00 - Tides Marine Rudder Port Bearing Type D for a 1 1/4 inch rudder stock.
Replacement Bearing and Seal...
RPBH-D-1000-00 - Tides Marine Rudder Port Bearing Type D for a 1 inch rudder stock.Replacement Bearing and Seal.
..
RPB-D-4500-00 - Tides Marine Rudder Port Bearing Type D for a 4 1/2 inch rudder stock.
Includes Fiberglass Liner.
..
RPB-D-4250-00 - Tides Marine Rudder Port Bearing Type D for a 4 1/4 inch rudder stock.
Includes Fiberglass Liner.
..
RPB-D-40MM-00 - Tides Marine Rudder Port Bearing Type D for a 40 Millimeter rudder stock.
Includes Fiberglass Liner...
