Your shopping cart is empty!
ONE-A-1250 - seriesOne Drip Free Shaft Seal for a 1 1/4 Inch Propeller Shaft, Housing Only
Parts Included:
ONE-A-1250 x 1
HAT-1250-02
The Minimum Distance require..
ONE-A-22M - seriesOne Drip Free Shaft Seal Housing Only for a 22 Millimeter Propeller Shaft
Parts included:
ONE-A-22M x 1
HAT-MM22
The Minimum Distance required from th..
ONE-A-25M - seriesOne Drip Free Shaft Seal Housing Only for a 25 Millimeter Propeller Shaft
Parts included:
ONE-A-25M x 1
HAT-MM25-02
The Minimum Distance required from..
ONE-A-30M - seriesOne Drip Free Shaft Seal Housing Only for a 30 Millimeter Propeller Shaft
Parts included:
ONE-A-30M x 1
HAT-MM30-02
The Minimum Distance required from..
Slide Pin Kit
Assortment of Pins and Rings for the Tides Marine SH-401 SS, SH-500 SS and SH-600 SS Slides
..
SH-401 - A 2 inch Reef Slide for use in the Tides Marine SailTrack System
..
SH-400 SS - A 2 inch Slide with a Universal Joint and 10mm Stud.
..
SH-403 - 2 inch slide to accept the original battslide receptacles for use in the Tides Marine SailTrack System..
SH-910-SST - Headboard Car Assembly.
Two Stainless Steel slides each measuring 3 inches in length spaced approximately 1 1/4 inches apart.
Stainless steel headboard car.
Headboard quick pin ..
SH-930 - Headboard Car Assembly.
Two Stainless Steel slides each measuring 3 inches in length spaced approximately 2 1/4 inches apart.
Aluminum (AISI 2024) headboard car (hardcoat anaodized).
..
SH-500 - 3 inch Headboard slide for use in the Tides Marine SailTrack System
..
SH-200B - Tides Marine Large Batten receptacle with an SH-400 slide. This receptacle accepts flat battens up to 2 inch wide, and up to 3/4 inch in diameter.
..
SH-200B-H - Tides Marine Large Batten receptacle ONLY. This receptacle accepts flat battens up to 2 inch wide, and up to 3/4 inch in diameter.
..
SH-600 - 1 3/8 inch Luff slide for use in the Tides Marine SailTrack System
..
SH-200A - Tides Marine Small Batten receptacle with an SH-400 slide.
This receptacle accepts flat battens up to 1 5/8 inch wide, and up to 1/2 inch in diameter.
..
SH-200A-H - Tides Marine Small Batten receptacle ONLY. This receptacle accepts flat battens up to 1 5/8 inch wide, and up to 1/2 inch in diameter.
..
SH-402 - Universal Joint with a 10mm stud for use in the Tides Marine SailTrack System..
SmartSeal Temperature Sensor for Twin Engines
The All New NEMA 2000 Tides Marine SmartSeal Temperature Sensor monitors the cooling water temperature of your shaft seals and displays a Warning Signa..
SmartSeal Temperature Sensor Remote for a Twin Engine configuration, Bulkhead Mount
..
SmartSeal Temperature Sensor Remote for Twin Engine Configuration, Panel Mount
..
SmartSeal Temperature Sensor Remote for a Single Engine, Bulkhead Mount
..
SmartSeal Temperature Sensor Remote for Single Engine Configuration, Panel Mount
..
SmartSeal Sensor Cable Extension 10 Meters / 33 Feet in length.
..
SmartSeal Temperature Sensor for Single Engines
The All New NEMA 2000 Tides Marine SmartSeal Temperature Sensor monitors the cooling water temperature of your shaft seal and displays a Warning Sign..
Spare Seal Carrier Kit for a SureSeal, StrongSeal or Rudder with a 7/8 Inch Shaft.
This unit comes with one 7/8" Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaf..
Spare Seal Carrier Kit for a StrongSeal or Rudder 1 Inch Shaft.
This unit comes with one 1" Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from..
Spare Seal Carrier Kit for a StrongSeal or Rudder 1 1/8 Inch shaft.
This unit comes with one 1 1/8" Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protect..
Spare Seal Carrier Kit for a StrongSeal or Rudder 1 1/4 Inch Shaft.
This unit comes with one 1 1/4" Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it f..
Spare Seal Carrier Kit for a SureSeal, StrongSeal or Rudder 1 3/8 Inch Shaft.
This unit comes with one 1 3/8" Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and pro..
Spare Seal Carrier Kit for a SureSeal, StrongSeal or Rudder 1 1/2 Inch Shaft.
This unit comes with one 1 1/2" Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft a..
Spare Seal Carrier Kit for a SureSeal, StrongSeal or Rudder 1 5/8 Inch Shaft.
This unit comes with one 1 5/8" Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and pro..
Spare Seal Carrier Kit for a SureSeal, StrongSeal or Rudder 1 3/4 Inch Shaft.
This unit comes with one 1 3/4" Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and pro..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 3 1/4 Inch Shaft.
This unit comes with two 3 1/4" Lip Seals and 1 Protective Cover that keeps the Lip Seals spinning with the shaft and protects ..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 3 1/2 Inch Shaft.
This unit comes with two 3 1/2" Lip Seals and 1 Protective Cover that keeps the Lip Seals spinning with the shaft and protects ..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 3 5/8 Inch Shaft.
This unit comes with two 3 5/8" Lip Seals and 1 Protective Cover that keeps the Lip Seals spinning with the shaft and protects ..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 3 3/4 Inch Shaft.
This unit comes with two 3 3/4" Lip Seals and 1 Protective Cover that keeps the Lip Seals spinning with the shaft and protects ..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 4 Inch Shaft.
This unit comes with two 4" Lip Seals and 1 Protective Cover that keeps the Lip Seals spinning with the shaft and protects them fro..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 4 1/4 Inch Shaft.
This unit comes with two 4 1/4" Lip Seals and 1 Protective Cover that keeps the Lip Seals spinning with the shaft and protects ..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 4 1/2 Inch Shaft.
This unit comes with two 4 1/2" Lip Seals and 1 Protective Cover that keeps the Lip Seals spinning with the shaft and protects ..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 5 Inch Shaft.
This unit comes with two 5" Lip Seals and 1 Protective Cover that keeps the Lip Seals spinning with the shaft and protects them fro..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 5 1/2 Inch Shaft.
This unit comes with two 5 1/2" Lip Seals and 1 Protective Cover that keeps the Lip Seals spinning with the shaft and protects ..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 6 Inch Shaft.
This unit comes with two 6" Lip Seals and 1 Protective Cover that keeps the Lip Seals spinning with the shaft and protects them fro..
Spare Seal Carrier Kit for a SureSeal 1 Inch Shaft.
This unit comes with one 1" Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage from dust..
Spare Seal Carrier Kit for a SureSeal 1 1/8 Inch Shaft.
This unit comes with one 1 1/8" Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage f..
Spare Seal Carrier Kit for a SureSeal 1 1/4 Inch Shaft.
This unit comes with one 1 1/4" Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage f..
* Spare Seal Carrier Kit for a SureSeal 1 3/8 Inch Shaft.
This unit comes with one 1 3/8" Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage..
* Spare Seal Carrier Kit for a SureSeal 1 3/8 Inch Shaft.
This unit comes with one 1 3/8" Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage..
Spare Seal Carrier Kit for a SureSeal 25 Millimeter Shaft.
This unit comes with one 25MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage ..
Spare Seal Carrier Kit for a SureSeal 30 Millimeter Shaft.
This unit comes with one 30MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage ..
Spare Seal Carrier Kit for a SureSeal 35 Millimeter Shaft.
This unit comes with one 35MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage ..
Spare Seal Carrier Kit for a SureSeal 40 Millimeter Shaft.
This unit comes with one 40MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage ..
Spare Seal Carrier Kit for a SureSeal 45 Millimeter Shaft.
This unit comes with one 45MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage ..
Spare Seal Carrier Kit for a SureSeal 70 Millimeter Shaft.
This unit comes with two 70MM Lip Seals and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage..
Spare Seal Carrier Kit for a SureSeal 75 Millimeter Shaft.
This unit comes with two 75MM Lip Seals and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage..
Spare Seal Carrier Kit for a SureSeal 90 Millimeter Shaft.
This unit comes with two 90MM Lip Seals and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 100 Millimeter Shaft.
This unit comes with two 100MM Lip Seals and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protect..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 105 Millimeter Shaft.
This unit comes with two 105MM Lip Seals and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protect..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 110 Millimeter Shaft.
This unit comes with two 110MM Lip Seals and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protect..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 115 Millimeter Shaft.
This unit comes with two 115MM Lip Seals and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protect..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 120 Millimeter Shaft.
This unit comes with two 120MM Lip Seals and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protect..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 125 Millimeter Shaft.
This unit comes with two 125MM Lip Seals and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protect..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 130 Millimeter Shaft.
This unit comes with two 130MM Lip Seals and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protect..
Spare Seal Carrier Kit for a StrongSeal 25 Millimeter Shaft.
This unit comes with one 25MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damag..
Spare Seal Carrier Kit for a StrongSeal 30 Millimeter Shaft.
This unit comes with one 30MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damag..
Spare Seal Carrier Kit for a StrongSeal 35 Millimeter Shaft.
This unit comes with one 35MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damag..
Spare Seal Carrier Kit for a StrongSeal 40 Millimeter Shaft.
This unit comes with one 40MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damag..
Spare Seal Carrier Kit for a StrongSeal 45 Millimeter Shaft.
This unit comes with one 45MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damag..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 50 Millimeter Shaft.
This unit comes with two 50MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects i..
Spare Seal Carrier Kit for a StrongSeal 55 Millimeter Shaft.
This unit comes with two 55MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damag..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 60 Millimeter Shaft.
This unit comes with two 60MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects i..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 65 Millimeter Shaft.
This unit comes with two 65MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects i..
Spare Seal Carrier Kit for a StrongSeal 70 Millimeter Shaft.
This unit comes with one 70MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damag..
Spare Seal Carrier Kit for a StrongSeal 75 Millimeter Shaft.
This unit comes with one 75MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damag..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 80 Millimeter Shaft.
This unit comes with one 80MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects i..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 85 Millimeter Shaft.
This unit comes with one 85MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects i..
Spare Seal Carrier Kit for a StrongSeal 90 Millimeter Shaft.
This unit comes with one 90MM Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damag..
Spare Seal Carrier Kit for a SureSeal or StrongSeal 95 Millimeter Shaft.
This unit comes with two 3 3/4" Lip Seals and 1 Protective Cover that keeps the Lip Seals spinning with the shaft and protec..
Spare Seal Carrier Kit for a 2 Inch Rudder Stock.
This unit comes with one 2 Inch Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage from du..
Spare Seal Carrier Kit for a 2 Inch Rudder Stock.
This unit comes with one 2 Inch Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage from du..
Spare Seal Carrier Kit for a 2 1/4 Inch Rudder Stock.
This unit comes with one 2 1/4 Inch Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage..
Spare Seal Carrier Kit for a 2 1/2 Inch Rudder Stock.
This unit comes with one 2 1/2 Inch Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage..
Spare Seal Carrier Kit for a 2 3/4 Inch Rudder Stock.
This unit comes with one 2 3/4 Inch Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage..
Spare Seal Carrier Kit for a 3 Inch Rudder Stock.
This unit comes with one 3 Inch Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage from du..
Spare Seal Carrier Kit for a 3 1/4 Inch Rudder Stock.
This unit comes with one 3 1/4 Inch Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage..
Spare Seal Carrier Kit for a 3 1/2 Inch Rudder Stock.
This unit comes with one 3 1/2 Inch Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage..
Spare Seal Carrier Kit for a 3 1/2 Inch Rudder Stock.
This unit comes with one 3 1/2 Inch Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage..
Spare Seal Carrier Kit for a 3 3/4 Inch Rudder Stock.
This unit comes with one 3 3/4 Inch Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage..
Spare Seal Carrier Kit for a 4 Inch Rudder Stock.
This unit comes with one 4 Inch Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage from du..
Spare Seal Carrier Kit for a 4 1/2 Inch Rudder Stock.
This unit comes with one 4 1/2 Inch Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage..
Spare Seal Carrier Kit for a 5 Inch Rudder Stock.
This unit comes with one 5 Inch Lip Seal and 1 Protective Cover that keeps the Lip Seal spinning with the shaft and protects it from damage from du..
