Tides Marine, in most cases, recommends that the Maximum Spacing Between Slides is 24 inches.However, it is recommended that on most systems that a 2 inch reef slide be located within 18 inches of the headboard if possible.The Track and Slide System comes with a Maximum of 1 slide for every 2 feet of Track included in the price.
SH-200ASmall Batten Receptacle
Includes SH-400 slide.Accepts flat battens to 1 5/8" wide.Accepts round receptacles to 1/2" diameter.
SH-200BLarge Batten Receptacle
Includes SH-400 slide.Accepts flat battens to 2" wide.Accepts round receptacles to 5/8" diameter.
SH-500Headboard Slide
Measures 3 inches in length.
SH-401Reef Slide
Measures 2 inches in length.
SH-600Intermediate Slide
Measures 1 3/8 inches in length.
SH-400Reef/Universal
2 inch Reef Slide with Universal Joint and 10MM stud.
SH-402Universal Joint
Universal Joint that connects an SH-401 to a Batten Receptacle.
SH-403Battslide
Slide to accept original Battslide receptacles.
SH-500Pinless Slide
SH-401Pinless Slide
SH-600Pinless Slide
1. Stainless Steel Slides or Naval Brass SlidesYou have two slide options. The first is hand-polished cast stainless slides. The second is machined naval brass slides.There is a cost difference between the two options.
2. Slides and batten receptacles are included in the price of the Tides Track System. Tides provides each customer with one (1) slide or receptacle of their choosing for every two (2) feet of track in the system.Example: 40 feet of track comes with 20 assorted slides and receptacles.More slides can be ordered at an extra cost.
3. Please review the schematic on this page.
We use cookies to improve your experience on our site.
Need to learn more? Privacy Policy – and – Cookie Policy