Since 1991, Tides Marine has provided essential marine components to the marine industry. At Tides, providing excellent customer service is our no. 1 priority and we proudly manufacture our Shaft Seals, Rudder Bearings and Sail Track in Deerfield Beach, Florida. Our products improve vessel performance and reliability, solve unique system issues, reduce the need for scheduled maintenance and provide worry-free, long-term boating enjoyment. We are the US Master Distributor for MATE-USA Pumps, Horns & Rubrail as well as Super Stainless, a gel based, non-abrasive, stainless steel cleaning agent.

  • Address: 3251 SW 13th Drive STE A
    Deerfield Beach, FL. 33442, USA
  • National Toll Free: 1-800-420-0949
  • Local or International: 954-420-0949
  • Order Fax: 954-420-0945
  • Accounting Fax: 954-420-5234
  • Purchasing Fax: 954-428-5288
  • Contact Us

Before placing your order, there are several measurements you need to take/confirm.

Measure the exact diameter of your rudder stock (.000"). Locate this measurement in the table below.

Next, note the flange height of your part (Measurement E) in the table. Verify there is enough room between the rudder shelf and the deck / miscellaneous construction above to install the unit (generally, 1 1/2 times the overall height of the unit (Measurement B).

Then, using the barrel diameter measurement in Column C, confirm there is sufficient clear space on the shelf around the rudder stock to locate the URB-LP.

Finally, check the position and mounted height of other steering components to determine if any adjustment will be necessary once the URB-LP is in place.