Tides Marine Nitrile Lip Seals are specifically designed for each type of sealing application, whether propeller shaft or rudder stock. They are the only seals which are covered by the Tides Warranty.
The outer shell is made of an Aramid fiber composite which is integrally molded to a rubber hinge and a nitrile lip edge.
A 316-stainless steel garter spring is incorporated to distribute loads uniformly over the propeller shaft or rudder stock.
When ordering, please supply the manufacturers part number (located on the face of the lip seal) to make sure you receive the correct replacement lip seal. It is also helpful if you can provide the Tides Marine Serial Number located on your existing part.
Rudder Lip Seals may be ordered online.