Tides Marine Zero-Draft FRP Tubing is used primarily for building rudder tubes and shaft logs. Made from high-strength epoxy resin and fiberglass using a proprietary Tides process, their bore is dimensionally constant from end to end. Unless otherwise requested, standard wall thickness is 1/4". Stock inside diameters range from 3" through 8" in 1/2" increments.

Before Ordering

To order, specify inside diameter and required length.

For inside diameters running from 3" up to (and including) 6 1/2", the maximum length is 48".

From 7" through 8", the maximum length is 20".

For custom sizes, contact Tides Marine.