KF-2000-01

Product Model: SPARESEALKIT2
  Product SKU: KF-2000-01
   Product Line: CKIT
Your Price: $179.10

Spare Seal Carrier Kit for a SureSeal 2 Inch propeller shaft.

This unit comes with two 2" Lip Seals and 2 Protective Covers that keeps the Lip Seals spinning with the shaft and protects them from damage from dust, oil or falling debris.

This KIT Part contains the following:

  • LIP SEAL F 2000 (JMC 9043 LUP) x 2
  • KH-2000 x 2
  • HAT-2000 x 2

Spare Seal Carrier Kits

Tides Marine’s Spare Seal Carriers were developed as a convenient device for storing spare lip seals on the propeller shaft between the SureSeal™ and the propeller shaft coupling. These carriers with spare lip seals can be installed along with each SureSeal™.

The SureSeal™ design allows the vessel operator to replace worn lip seals in the housing with these spare lip seals without uncoupling the shaft from the transmission. If necessary, the worn lip seals may be replaced in the water – no haul-out required.

The spare lip seal carrier is a lightweight, two-piece composite housing which is clamped over the spare lip seals and onto the propeller shaft between the SureSeal™ and the propeller shaft coupling. They are available in both imperial and metric sizes.

  • Spare seal carrier part numbers for propeller shafts with diameters up to and including 1 3/4”
    contain one spare lip seal in a single housing.
  • Spare seal carrier part numbers for propeller shafts with diameters from 2” up to and including 3”
    contain two (2) spare lip seals, each in their own housing.
  • Spare seal carrier part numbers for propeller shaft diameters 3 1/4” and larger contain two spare lip
    seals in a single housing.
  • Spare Seal Carrier Kits for Rudders contain one spare lip seal in a single housing.



Identify your propeller shaft outside diameter. Next, confirm that there is enough clean, smooth space on the shaft to position the Spare Seal Carrier(s) between the Shaft Seal and the Coupler.


Caution

The Spare Seal Carriers SHOULD NOT TOUCH the Shaft Seal.

The Spare Seal Carriers should be at least 1 inch from the Shaft Seal Housing.


Note

When ordering a Spare Seal Carrier Kit for your propeller shaft, you must first determine if you have a SureSeal™ or a StrongSeal™ (StrongSeals were last produced in 2000).

The lip seals for some shaft sizes are NOT interchangeable between the SureSeal™ and the StrongSeal™.

If you are not sure if you have a SureSeal™ or a StrongSeal™ Click Here to see a picture of them.

Related Products