Spare Rudder Seal Carriers
Product Overview
Tides Marine Spare Rudder Seal Carriers were developed as a convenient place to store spare lip seals and as a tool for making the job of seal replacement easier. They are a recommended accessory for every type of Tides Marine PORT/BEARINGS.
Installed at the same time as the RPB, they allow lip seal replacement to be performed without uncoupling the stock from the steering system or dropping the rudder.
The unit is a lightweight, two-piece plastic housing which is affixed on the stock between the Tides font color=#008080>Marine RPB unit and upper rudder bearing. Available in all common stock sizes, each unit comes with a seal and protective cone for installation.
Before Ordering
To determine which part to order, you need to measure the diameter of the rudder stock "A". Next confirm that there is sufficient space to accommodate both the body diameter "B" and overall height "C".
SPECIFICATIONS (dimensions in inches)
| RUDDER STOCK SIZE | DIA | HEIGHT | PART NUMBER |
| A | B | C | |
| 1" | 2 1/2" | 1 1/4" | KR-1000 |
| 1 1/8" | 2 1/2" | 1 1/4" | KR-1125 |
| 1 1/4" | 2 1/2" | 1 1/2" | KR-1250 |
| 1 3/8" | 3" | 1 1/2" | KR-1375 |
| 1 1/2" | 3 1/2" | 1 1/2" | KR-1500 |
| 1 3/4" | 3 1/2" | 1 1/2" | KR-1750 |
| 2" | 4" | 1 1/2" | KR-2000 |
| 2 1/4" | 4 1/2" | 1 1/2" | KR-2250 |
| 2 1/2" | 5" | 1 1/2" | KR-2500 |
| 2 3/4" | 5" | 1 1/2" | KR-2750 |
| 3" | 5" | 1 1/2" | KR-3000 |
| 3 1/4" | 5" | 1 1/2" | KR-3250 |
| 3 1/2" | 5 1/2" | 1 1/2" | KR-3500 |
| 3 3/4" | 5 1/2" | 1 1/2" | KR-3750 |
| 4" | 6" | 1 1/2" | KR-4000 |
| 4 1/2" | 6" | 1 1/2" | KR-4500 |
| 5" | 7" | 1 1/2" | KR-5000 |
Contact us for more information on the Rudder Spare Seal Carrier Kit
Quality Marine Systems at a fair price....
it's just the beginning of the Tides Marine experience.
Tides Marine 3251 SW 13th Dr. Suite A Deerfield Beach, Fl 33442
Tel: (800) 420-0949 Tel: (954) 420-0949 Order Fax: (954) 420-0945 General Fax: (954) 420-5234
Copyright © 2011 Tides Marine, Inc. All Rights Reserved.